Serial Number Lookup for 2 x Komatsu D375-5 and a CAT D8R

Hello everyone. Hope you had a merry Christmas.

Looking to purchase the above-mentioned pieces and was hoping someone could help me verify the year of manufacture as equipmentwatch and ironrecord do not go as far in terms of year of manufacture.

1) Komatsu D375-5, KMT0D050P02019467

2) Komatsu D375-5, KMT0D050C02019392

3) D8R - CAT00D8RA9EM05758

Thanks in advance.

Serial Number Lookup for 2 x Komatsu D375-5 and a CAT D8R

John Deere 655c series 2 v pattern control?

Hello, I am brand new to the forum and had a couple of questions. Any information would be very much appreciated.

I am looking at buying a 2003 John Deere 655c series 2 track loader and plan on working it a little on the side with the hopes of making a little extra money, it has approximately 4600 hours on it with about 50% under carriage, the seller is asking a pretty reasonable price. I have ran a Cat 939 a little in the past with the joy stick control, I was wondering if the V pattern on the JD is something that is liked or disliked? how is turning with the steer peddles? Also are there any known problems with these machines?

Thanks.

John Deere 655c series 2 v pattern control?

310A johndeere blowing dip stick out

A friend of mine told me were a 1980 310A jd back hoe clean no dents pins tight paint in great condition, has been setting for around three years in a shed, decided to go see it talked with the owner, the had bought it to use on farm and did for a while then started to use oil, had it over hauled and when they tried to use it would blow the dip stick outof the engine, they got tired of it and parked it in the shed, when i went to see it can turn engine over, just wonder what you guys thought would cause that, i bought it cheap enough to triple my money by parting it out thanks

310A johndeere blowing dip stick out

FMC Still Working

Saw this in Oregon in 2014. Now used to support tower operations:





Did not see it in actual use as they were in the process of moving the tower to a new setting.

Attached Images

  

FMC Still Working

Please help! :(

Hi! I am a year1 student in singapore who just started civil engineering.Please don't mind me but i really need help with excavators.
So i am given an assignment where i hve to place a concrete precast in a trench dimensions 6km long 0.75 m depth and 1.2m depth worth 5400cbm
I am using a mini excavator (cuz industrial area) with 47.93cubm per hr.

After including loading and dumping time of the earth etc,I'm coming at abt 2 days to complete the job with 1 excavator and 2 trucks.
Is it realistic? Please help. Really appreciate it.

Please help! :(

Link belt 240lx hydraulic head scratcher

Thought I would run it past some of the sharp fellas that look on this forum. I'll start from the beginning,machine is a 2006 240lx with a Waratah 622b processing head. When machine gets warm that is when it starts acting up. after about an hour of running the stick will start to slow and pull the engine down,especially when pulling in towards you. After pulling the stick in it will continue to drift in slowly until pushing the the stick out again.The mechanic pulled the load hold check valve for the circuit and rebuilt it and swapped it with the load hold valve from the boom circuit, figuring that the problem would move to the boom if the check valve was faulty. Didn't solve or move the problem. Checked the pilot pressure and it was low. Manual calls for 585psi and machine had 280psi. I have ordered a new pilot pump hoping that it will solve the problem. If that doesn't fix it I don't know where to look next. Any ideas appreciated. Thanks in advance.

Ps. I think this machine is similar to the case cx240 and the sumitomo dash 3 series. But I'm not 100% sure.

Link belt 240lx hydraulic head scratcher

Pathetic dog commercial

I'm going to make a commercial of my dog. When it's time for him to eat he can give you them sad eyes that will make you grab your checkbook more than those dogs on that stupid commercial. :crying

Pathetic dog commercial