machines brand drott

prejudice if it were possible I would like to have information on the machines and excavators brand drott believe are the ancestors of houses, especially wheel excavator drott 80 cruz air, I believe you call it, from what I know has drott inbentato bucket multi function one in four , I am wrong?

https://youtu.be/3GIU0L-Ks8M
https://youtu.be/Mdbb5EahZvM


:confused:

Attached Images

    

machines brand drott

Caterpillar 312c hydraulic cylinder on stick stuck

Hi I have a cat 312c excavator that the hydraulic cylinder on the sticks stuck in the out position. It acts like a stuck valve but may be the relief valve. I broke the lines loose cylinder returns. Or push it against a tree and can get it to return but returns to the stuck position. Any help would be appreciated.

Caterpillar 312c hydraulic cylinder on stick stuck

Bobcat t320 shuts down seconds after starting. No codes!! Help

Hi, I am having some start up issues with my 07’ T320. After 4 days of not running the machine due to inclement weather I attempted to start up the machine and when the motor turned over and fired it only starts up for a couple seconds then shuts down with no codes flashing. No sputter or signs of lack of fuel flow, fuel primer pump doesn’t look constricted, changed fuel filter and checked fuel flow fuse/relay and even charged the battery. Unfortunately these attempts never solved the issue, it like something is shutting off fuel directly to the motor. Since the machine is not flashing codes its difficult to determine the cause of the immediate shutdown. Please keep in mind we have had 32 and below tempts for the past week. I called bobcat and they said just bring it in…Naturally. I have a shop where we service our equipment so the ability to work on the machine is no stranger to me.. If anyone has suggestions or possible leads to a solution it would be greatly appreciated. Thanks for your time.

Bobcat t320 shuts down seconds after starting. No codes!! Help

Bobcat t320 shuts down seconds after starting. No codes!! Help

Hi, I am having some starting issues with my 07’ T320. After 4 days of not running the machine due to inclement weather I attempted to start up the machine and when the motor turned over and fired it only starts up for a couple seconds then shuts down with no codes flashing. No sputter or signs of lack of fuel flow, fuel primer pump doesn’t look constricted, changed fuel filter and checked fuel flow fuse/relay and even charged the battery. Unfortunately these attempts never solved the issue, it like something is shutting off fuel directly to the motor. Since the machine is not flashing codes its difficult to determine the cause of the immediate shutdown. Please keep in mind we have had 32 and below tempts for the past week. I called bobcat and they said just bring it in…Naturally. I have a shop where we service our equipment so the ability to work on the machine is no stranger to me.. If anyone has suggestions or possible leads to a solution it would be greatly appreciated. Thanks for your time.

Bobcat t320 shuts down seconds after starting. No codes!! Help

One Man's Collection

This auction took place in the spring of 2013. Because I had owned 24 motorcycles through the years I was asked by the man hired to
set it up and get things running, to start and make sure all of the Indian motorcycles ran. The collection was mainly crawlers and old
tractors, The old 1897 Goldengate pump engine of which there are only two known to exist, I have seen run. This is quite a list and
some Youtube video. I am not in any video by the way.

http://ift.tt/1Vmos9q

Truck Shop

One Man's Collection

Contracting to water company

Ok like the title says, my local water co. Approached me about the possibility of contracting with them to handle all water line break repairs, meter installs, basically everything they do except reading meters and monitoring the towers.

I have the equipment, they will supply me all maps( showing locations, line sizes, valve locations, etc.)
I have a good working relationship, I have helped them before when they needed an excavator, or just in a situation they neede help.

I live just a few miles from the shop, and know the area they cover. My question is what is common practice before we set down with the board. Time and material, contract price per break, ?

There is a few other districts that do this but I don't know how they have it set up. Any body have experience doing this? Just putting it out there to see what other parts of the country do.

Thanks for looking

Contracting to water company

Komatsu Excavator PC128-UU Boom Hydraulic Pr

Komatsu Excavator PC128-UU Boom Hydraulic Problems
Serial number 19XX.

This has been sitting for about 3 months. Today I went out and fired it up. It started right off. but there was a constant beeping. The oil, coolant and hydraulic are all OK. I figured it had to be something else. After it warmed up some, I attempted to move it around to see what the problem was, and here is what I discovered:
It shows a code 37. When it is just beeping:
The blade goes up and down.
It travel forward and reverse.
It swings left and swings right.
The boom goes down, but it DOES NOT go up.
The boom extends out, but it DOES NOT come in.
The bucket opens and closes.
The thumb works both ways, but occasionally sticks and kills the machine (but this is not a new problem, it did it last fall).

When I pull the override switch, the beeping stops, but there is a constant buzzer sound, and:
The boon extends out AND back.
The boom goes down AND up.
All other functions also work.

Any ideas what it could be or where to start. Could the cold weather (it only got down to about 5 degrees here), have anything to do with it?

Thanks in advance.

Pat

Komatsu Excavator PC128-UU Boom Hydraulic Pr