JLG 45IC with a few problems

I am new to the whole JLG troubleshooting so bare with me for some of these issues. First off I have a couple of different issues,

1- when horsepower card is installed jlg doesn't want to move but at a snails pace

2- when I start the machine from the ground controls it is very slow to start (starter is slow), but from the platform it spins up nice and fast.

3- the swing control seems to not adjust while below the horizon, and it swings too fast.

Any help would be greatly appreciated.



FYI- I took on this project at a campground that I live at where many people have tried to fix the varying issues, so far I replaced the big wire harness from the platform to the ground control (someone had previously tried to do a repair on the cable so I just replaced the whole harness) and I replaced the 4 wire harness that provides power to the platform.



I think that one or both of the drive control/ flow control cards are bad. At the present time I swappedthe wire connectors to the drive cards and that gave me the ability to control the speed of the swing when above the horizon. Which is great! However I would like to be able to control it when below the horizon.





Thanks!!

Scott

JLG 45IC with a few problems