I've got a 2006 JD310SG w/powershift. It's the later serial number run. Pretty much a standard construction package machine with 5000 hrs. and no real problems. Works great.
Today I changed the transmission oil and filter. Let it drain for half an hour until empty. Looked like it drained out several gallons or more. Spec calls for 4 gallons on an oil and filter change. I put in 3 gallons of Hy Gard and checked it.....Wow! It is a couple of inches over the upper full mark on the dipstick. I checked it several times by the book: running at idle and it is stable at about 2" above the full mark on the dipstick. What's going on? I was expecting to have to put in another gallon but now may have to drain one gallon out. Yes, I check it in the normal way by inserting the dipstick fully at low idle.
Thanks for any help,
rScotty
Today I changed the transmission oil and filter. Let it drain for half an hour until empty. Looked like it drained out several gallons or more. Spec calls for 4 gallons on an oil and filter change. I put in 3 gallons of Hy Gard and checked it.....Wow! It is a couple of inches over the upper full mark on the dipstick. I checked it several times by the book: running at idle and it is stable at about 2" above the full mark on the dipstick. What's going on? I was expecting to have to put in another gallon but now may have to drain one gallon out. Yes, I check it in the normal way by inserting the dipstick fully at low idle.
Thanks for any help,
rScotty
JD310SG transmission oil level too high?
0 commentaires:
Enregistrer un commentaire