ok I have all these different size fittings to thread in and on hoses and fittings so they do not leak of and drain hydraulic oil everywhere,its a pain finding the right one.
I have some rubber corks that go from 1/2 to 3/4 at a real steep angle,just not universel enough,what I am looking for is a solid rubber cork that go from a point to about an inch on the back that is about three inches long max. it would work on plugging a small pilot control valve to a one inch line.
any ideas something has to be easier then carrying around all these fittings, or jamming a knife wittled stick in a hole, so it does not lose a bunch of 100$ a gallon hitachi oil.
I have some rubber corks that go from 1/2 to 3/4 at a real steep angle,just not universel enough,what I am looking for is a solid rubber cork that go from a point to about an inch on the back that is about three inches long max. it would work on plugging a small pilot control valve to a one inch line.
any ideas something has to be easier then carrying around all these fittings, or jamming a knife wittled stick in a hole, so it does not lose a bunch of 100$ a gallon hitachi oil.
service truck ideas (hydraulic line change out, rubber plugs)??
0 commentaires:
Enregistrer un commentaire