I recently bought a Cat 325 excavator (older machine 16k hours) for farm use. Never had one before so am a novice. All is good, except I cannot find any attachments that would fit the quick hitch.
Measurements are: Pin diameter, 76.2mm (3 inch), pin c to c is 405mm and between ears is 307.
The closest seems to be a Cat 320 hitch at 80mm, 460mm and 311mm, although I thought C to C for a cat 320 was less than 460mm.
The problem is that if I get the wrong ripper it will be costly to alter. Does anyone have any thoughts on whether cat 320 might fit or is it all going to be trial and error.
Barry.
Measurements are: Pin diameter, 76.2mm (3 inch), pin c to c is 405mm and between ears is 307.
The closest seems to be a Cat 320 hitch at 80mm, 460mm and 311mm, although I thought C to C for a cat 320 was less than 460mm.
The problem is that if I get the wrong ripper it will be costly to alter. Does anyone have any thoughts on whether cat 320 might fit or is it all going to be trial and error.
Barry.
Unknown pin spacings
0 commentaires:
Enregistrer un commentaire