Curious if someone see's something I don't in these piston pics regarding the nut. The manual doesn't say anything other then "remove nut". My 3/4 ratchet broke at the socket after apply about 500 pounds of pressure with a 10' cheater bar. I see some blue thread lock but that shouldn't matter with the amount of force I've applied. There's a small hole next to the nut but I don't see any screw/hex in it. This is the swing cylinder from a JD 310C....I've read mix results regarding applying heat so not sure if that's my next step. Any tips would be great
Piston nut won't budge - broke the ratchet - pics
0 commentaires:
Enregistrer un commentaire