My dad rebuilt a D31P-18 with the 6D95DL. After first time he put it together the dozer had very low oil pressure. We researched and found out the wrong cam bearing was installed. Replaced the cam bearing and re-installed the engine. Now at first startup we have close to 100psi. Yes 100. After the engine warms completely (15 minutes of running) the oil pressure drops to around 10psi at full throttle and maybe 3-5 at idle. This seems way to low and we are not comfortable running it like this....
D31P-18 Low Oil Pressure after Warm-Up
D31P-18 Low Oil Pressure after Warm-Up
0 commentaires:
Enregistrer un commentaire