Rigid frame to articulated
Rigid frame to articulated
lundi 31 juillet 2017
Rigid frame to articulated
General truck questions....
Been looking at a few used medium duty box trucks (under CDL) and ran across a few things that I had questions on....
1) I saw an international truck (1983) that had oil bath front hubs.....What are the pros and cons of oil bath VS "regular"
greased hub bearings?....are they more trouble or potential trouble than they are worth?
2) I saw a 1990 International with the Dayton Spoked wheels....Most everything now a days has bud style wheels....
should I steer clear of...
General truck questions....
General truck questions....
580c bearing carrier has uneven brake pad surface - how to remove phillips head screw?
I've tried removing the Phillips head screw, but it won't budge. I've tried a regular Phillips large screwdriver and I've tried a large #3 bit with an adjustable wrench on it. I sprayed the nut with PB Blaster, but doubt that will help since it can't get in there very well. I also tried...
580c bearing carrier has uneven brake pad surface - how to remove phillips head screw?
580c bearing carrier has uneven brake pad surface - how to remove phillips head screw?
Wa 450-2 Wireing harness issues
Cab to disconnect relay An from that harness to starter safety relay mounted on starter. Well now my machine is still dead in the water. Want start from the key, so I...
Wa 450-2 Wireing harness issues
Wa 450-2 Wireing harness issues
Manual tilt to dual hydraulic tilt conversion for 96J D5 Caterpillar
Manual tilt to dual hydraulic tilt conversion for 96J D5 Caterpillar
1990 Mack em-6 injector pump troubles?
Engine seems to surge/ hunts. Started in the middle areas of the throttle, seemed to go away when wide open, or totally out of the throttle. Got worse and worse
I first thought it was tires or driveline, but tires wouldn't make any difference in and out of the throttle (it stops doing it as soon as you let...
1990 Mack em-6 injector pump troubles?
1990 Mack em-6 injector pump troubles?
Setting up thumb hydraulics
Setting up thumb hydraulics
Fitting type
Are these things JIS fittings? I can comfortably thread a 3/4" NPT male fitting into the hose fittings but obviously the inside taper isn't right based on what I see...
Fitting type
Fitting type
Cat Skidsteer Picture Request
I am a new member but have read threads many times.
I am launching a website for the used and Reman CAT skidsteer parts we sell.
I need good quality pictures of B and C series Cat machines working in common construction and landscaping environments.
Obviously I would like the machines to look nice and not too beat up etc.
If your pictures are satisfactory I will be glad to PayPal you some funds for you trouble.
Any business name or number will be covered up by our artist...
Cat Skidsteer Picture Request
Cat Skidsteer Picture Request
336 cat
anyone got any ideas as to what i can check? i pull the check valve on the polit manifold and all looked good there.
thanks
336 cat
Mitsubishi mm30sr
the joy sticks wont work or the spin pedal but the blade and tracks do,
i have exhausted my efforts on what i can do. im new to this machine and would like to make it work so i can use it for my yard.
any help would be greatly appreciated.
thanks casey
Mitsubishi mm30sr
Pressure build up in fuel tank - Normal??
Here goes: when sun hits the fuel tank in the morning, tank warms up and pressurizes the tank. (think of a plastic fuel can that swells up when left in the sun) This pressure build up causes fuel to leak out from the top of the fuel sediment bowl. (not sure if a fitting or seal or ??) If I loosen the fuel cap overnight, no leak the next day....
Pressure build up in fuel tank - Normal??
Pressure build up in fuel tank - Normal??
Geni e Z45/25J Driving fast foreward just slows down
Geni e Z45/25J Driving fast foreward just slows down
963
One of the 963 is the original 963 have been checked out by cat oil samples n etc mechanically sounds but need tracks. Got the 3304 motor. Had pictures on my old phone n it died. I'll go back n take more pictures of it soon
It's a nice lookin machine in my opinion n he want 20,000 for machine n I found a shop to put a brand new undercarriage on it for 13000. What is your opinion on...
963
963
Milwaukee 6232-6 deep cut sawzall
Milwaukee 6232-6 deep cut sawzall
OOPS..someone forgot to mark out the utilities...
http://ift.tt/2vgdJKq
OOPS..someone forgot to mark out the utilities...
Working the National 1300A
The next...
Working the National 1300A
Working the National 1300A
Hitachi Ex120-2 got a problem :3 Running very very very fast otherwise engine stalls :(
A have a excavator which model is Hitachi EX120-2
When i pull the hand pilot valve or travel pilot valve slowly then engine stalls easily
but when i pull them very fast then engine ok and excavator works very fast
and in this situation cant operate
what can i do now?
Hitachi Ex120-2 got a problem :3 Running very very very fast otherwise engine stalls :(
Cat 951-C in my sights
Cat 951-C in my sights
Cat 951-C in my sights
Front Bucket Tilting Issue (Cat 426)
Front Bucket Tilting Issue (Cat 426)
Front Bucket Tilting Issue (Cat 426)
Bosch 1634VSK Reciprocating saw
Bosch 1634VSK Reciprocating saw
Manual for the KOMATSU PC50UU
Someone have a maintenance manual for the komatsu PC50UU? If so, please send me a pdf copy.
I only have the spare part list and is in japanese. I need to make some maintenance and i dont have any reference of the hydraulic filter (they are without reference).
thank you so much.
Best regards
Manual for the KOMATSU PC50UU
JCB drive belt 320/08599
This belt fits
backhoe loaders 2CX,210,212,MIDI CX
backhoe loader 3CX,4CX,5CX,21,215,217
skid steer loaders (Robot)
telescopic handlers (LOADALL)
wheel loaders
JCB drive belt 320/08599
Flags on oversized loads
Flags on oversized loads
Case 530 Mod 31 backhoe swing problem(s)
Case 530 Mod 31 backhoe swing problem(s)
Case 530 Mod 31 backhoe swing problem(s)
Autonomous Dozers
http://ift.tt/2hgzCny
More doublespeak!
Autonomous Dozers
Cat 325L drive slow on one side
I noticed yesterday when I lift the slow side in the air and run the track forward or reverse and push down on the stick, the track speed goes to normal. The stick doesn't lift the digger until I stop moving the track. What could be the cause of this?
Any help would be great.
Cheers
Leigh
Cat 325L drive slow on one side
How about the use of the scissor lifts?
dimanche 30 juillet 2017
I’m not sure about the maintenance requirements of the triple scissor lift tables. Would appreciate if you can share the needed...
How about the use of the scissor lifts?
How about the use of the scissor lifts?
Software For Tracking Customer Equipment Maintenance?
Software For Tracking Customer Equipment Maintenance?
4in1 on any bobcat?
4in1 on any bobcat?
When to replace all loader tires?
We had a loader tire blow our on the Cat It24. Sounded like a bomb went off, and blew debris over a 100' Scary Chit.
Definitely think if anyone was in the area, death or serious injury would result.
Anyone have advice on replacing the single tire that blew out? or going ahead to replace all 4? We priced some new Chinese tires at $800 a piece and about $400-500 to mount and replace all 4. Current tires are 10-15 years...
When to replace all loader tires?
When to replace all loader tires?
Grizzly Trucks
I lived and worked in North Van when these trucks were built..I had just finished my 10 years at Pacific ..
This is truck #1 of 13 or 14 trucks..It has been on the Island for years and...
Grizzly Trucks
Grizzly Trucks
Help with ASVSR80 bogs down - hydraulic issue?
It seems that unless I really give it the fuel (rpm) the mower doesn't turn very fast and when using the mower and moving the machine the machine is not responding. Like all the hydraulic fuel is going to the mower?
I started off using the little thumb roller to test the mower (it allows me to use the mower but the blades weren't on...
Help with ASVSR80 bogs down - hydraulic issue?
Help with ASVSR80 bogs down - hydraulic issue?
Rad tanks
Rad tanks
Rivers Inlet & other Malloch & Moseley Operations
Rivers Inlet & other Malloch & Moseley Operations
Junkayrd's work thread.....maybe haha
Junkayrd's work thread.....maybe haha
Junkayrd's work thread.....maybe haha
Exhaust Brake
Exhaust Brake
Volvo Grader G940 secondary steering issue
Volvo Grader G940 secondary steering issue
Hello for north Texas
Hello for north Texas
JD 410 Hydraulics
I've had hydraulic problems but after adjusting pump got everything working good...until recently. Went to use the machine and all the hydraulics are extremely slow (backhoe and loader equally). Since I had raised the pump PSI last year to the book PSI of about 1600 psi it ran better than ever so I figured the filters and screen were dirty with the added pressure. Changed both filters and cleaned the screen but no change.
The pressure is holding at...
JD 410 Hydraulics
JD 410 Hydraulics
Starting Case 580CK in gear
Starting Case 580CK in gear
Case 580K hydraulic issues
Case 580K hydraulic issues
Case 580K hydraulic issues
Komatsu WB-140 2N dies
Komatsu WB-140 2N dies
Komatsu WB-140 2N dies
Laser or GPS? HELP!!!
Laser or GPS? HELP!!!
John Deere 644K bucket
John Deere 644K bucket
Size of thumb?
Size of thumb?
사다리베팅사이트『♤【AGT68。COM】♤』콜걸대행ろ경륜레이스
사다리베팅사이트『♤【AGT68。COM】♤』콜걸대행ろ경륜레이스
사다리베팅사이트『♤【AGT68。COM】♤』콜걸대행ろ경륜레이스
바카라사이트『♤【AGT68。COM】♤』배당률계산기ざ카지노규칙
바카라사이트『♤【AGT68。COM】♤』배당률계산기ざ카지노규칙
바카라사이트『♤【AGT68。COM】♤』배당률계산기ざ카지노규칙
해외토토『♤【AGT68。COM】♤』온라인경마ら바카라출목표
해외토토『♤【AGT68。COM】♤』온라인경마ら바카라출목표
해외토토『♤【AGT68。COM】♤』온라인경마ら바카라출목표
중국온라인카지노『♤【AGT68。COM】♤』섯다돈따는법っ카지노주소
중국온라인카지노『♤【AGT68。COM】♤』섯다돈따는법っ카지노주소
중국온라인카지노『♤【AGT68。COM】♤』섯다돈따는법っ카지노주소
에볼루션게이밍『♤【AGT68。COM】♤』바카라사이트ふ바두기
에볼루션게이밍『♤【AGT68。COM】♤』바카라사이트ふ바두기
에볼루션게이밍『♤【AGT68。COM】♤』바카라사이트ふ바두기
카지노게임다운로드『♤【AGT68。COM】♤』라이브바카라소스て영국바카라
카지노게임다운로드『♤【AGT68。COM】♤』라이브바카라소스て영국바카라
카지노게임다운로드『♤【AGT68。COM】♤』라이브바카라소스て영국바카라
마닐라호텔카지노『♤【AGT68。COM】♤』블랙잭베팅전략う라스베가스카지노
마닐라호텔카지노『♤【AGT68。COM】♤』블랙잭베팅전략う라스베가스카지노
마닐라호텔카지노『♤【AGT68。COM】♤』블랙잭베팅전략う라스베가스카지노
스포츠조선경마출마표『♤【AGT68。COM】♤』온라인카지노조작ひ바두기
스포츠조선경마출마표『♤【AGT68。COM】♤』온라인카지노조작ひ바두기
스포츠조선경마출마표『♤【AGT68。COM】♤』온라인카지노조작ひ바두기
카지노사이트『♤【AGT68。COM】♤』축구승무패ぜ바카라사이트
카지노사이트『♤【AGT68。COM】♤』축구승무패ぜ바카라사이트
카지노사이트『♤【AGT68。COM】♤』축구승무패ぜ바카라사이트
바카라사이트『♤【AGT68。COM】♤』폰타나카지노ふ카지노승률
바카라사이트『♤【AGT68。COM】♤』폰타나카지노ふ카지노승률
바카라사이트『♤【AGT68。COM】♤』폰타나카지노ふ카지노승률
아시아카지노『♤【AGT68。COM】♤』복불복게임ふ생중계바카라
아시아카지노『♤【AGT68。COM】♤』복불복게임ふ생중계바카라
아시아카지노『♤【AGT68。COM】♤』복불복게임ふ생중계바카라
제주카지노『♤【AGT68。COM】♤』호텔트윈ぴ무료바다이야기게임
제주카지노『♤【AGT68。COM】♤』호텔트윈ぴ무료바다이야기게임
제주카지노『♤【AGT68。COM】♤』호텔트윈ぴ무료바다이야기게임
바카라후기『♤【AGT68。COM】♤』7포커확률く타짜카지노
바카라후기『♤【AGT68。COM】♤』7포커확률く타짜카지노
바카라후기『♤【AGT68。COM】♤』7포커확률く타짜카지노
애인대행서비스『♤【AGT68。COM】♤』강원랜드카지노싸이트ぞ오토바카라
애인대행서비스『♤【AGT68。COM】♤』강원랜드카지노싸이트ぞ오토바카라
애인대행서비스『♤【AGT68。COM】♤』강원랜드카지노싸이트ぞ오토바카라
네임드배팅『♤【AGT68。COM】♤』카지노사이트づ메가888카지노
네임드배팅『♤【AGT68。COM】♤』카지노사이트づ메가888카지노
네임드배팅『♤【AGT68。COM】♤』카지노사이트づ메가888카지노
포커베팅규칙『♤【AGT68。COM】♤』하나카지노こ제주도바카라
포커베팅규칙『♤【AGT68。COM】♤』하나카지노こ제주도바카라
포커베팅규칙『♤【AGT68。COM】♤』하나카지노こ제주도바카라
카지노사이트『♤【AGT68。COM】♤』온라인블랙잭ず바카라하는곳
카지노사이트『♤【AGT68。COM】♤』온라인블랙잭ず바카라하는곳
카지노사이트『♤【AGT68。COM】♤』온라인블랙잭ず바카라하는곳
바카라사이트『♤【AGT68。COM】♤』사설경마む안전놀이터주소
바카라사이트『♤【AGT68。COM】♤』사설경마む안전놀이터주소
바카라사이트『♤【AGT68。COM】♤』사설경마む안전놀이터주소
베팅가이드『♤【AGT68。COM】♤』서울카지노사이트で블랙잭기본전략
베팅가이드『♤【AGT68。COM】♤』서울카지노사이트で블랙잭기본전략
베팅가이드『♤【AGT68。COM】♤』서울카지노사이트で블랙잭기본전략
카지노사이트『♤【AGT68。COM】♤』파라다이스카지노こ월드카지노
카지노사이트『♤【AGT68。COM】♤』파라다이스카지노こ월드카지노
카지노사이트『♤【AGT68。COM】♤』파라다이스카지노こ월드카지노
바카라사이트『♤【AGT68。COM】♤』카드게임규칙し바카라사이트
바카라사이트『♤【AGT68。COM】♤』카드게임규칙し바카라사이트
바카라사이트『♤【AGT68。COM】♤』카드게임규칙し바카라사이트
바카라확률계산기『♤【AGT68。COM】♤』마닐라카지노롤링ぜ야구도박
바카라확률계산기『♤【AGT68。COM】♤』마닐라카지노롤링ぜ야구도박
바카라확률계산기『♤【AGT68。COM】♤』마닐라카지노롤링ぜ야구도박
블랙잭더블다운『♤【AGT68。COM】♤』바카라사이트ざ카지노뷰
블랙잭더블다운『♤【AGT68。COM】♤』바카라사이트ざ카지노뷰
블랙잭더블다운『♤【AGT68。COM】♤』바카라사이트ざ카지노뷰
라이브바둑이『♤【AGT68。COM】♤』메가888카지노ぞ인터넷바카라
라이브바둑이『♤【AGT68。COM】♤』메가888카지노ぞ인터넷바카라
라이브바둑이『♤【AGT68。COM】♤』메가888카지노ぞ인터넷바카라
사다리잘하는법『♤【AGT68。COM】♤』카지노사이트ど포커의확률
사다리잘하는법『♤【AGT68。COM】♤』카지노사이트ど포커의확률
사다리잘하는법『♤【AGT68。COM】♤』카지노사이트ど포커의확률
블랙잭돈따는법『♤【AGT68。COM】♤』카지노하는곳ぺ생중계바카라싸이트
블랙잭돈따는법『♤【AGT68。COM】♤』카지노하는곳ぺ생중계바카라싸이트
블랙잭돈따는법『♤【AGT68。COM】♤』카지노하는곳ぺ생중계바카라싸이트
윈스에이플러스카지노『♤【AGT68。COM】♤』마닐라호텔카지노べ스포츠토토배당률보기
윈스에이플러스카지노『♤【AGT68。COM】♤』마닐라호텔카지노べ스포츠토토배당률보기
윈스에이플러스카지노『♤【AGT68。COM】♤』마닐라호텔카지노べ스포츠토토배당률보기
카지노사이트『♤【AGT68。COM】♤』농구배팅추천ぎ월드바카라사이트
카지노사이트『♤【AGT68。COM】♤』농구배팅추천ぎ월드바카라사이트
카지노사이트『♤【AGT68。COM】♤』농구배팅추천ぎ월드바카라사이트
바카라사이트『♤【AGT68。COM】♤』인천카지노체험ん온라인카지노
바카라사이트『♤【AGT68。COM】♤』인천카지노체험ん온라인카지노
바카라사이트『♤【AGT68。COM】♤』인천카지노체험ん온라인카지노
생중계바카라게임『♤【AGT68。COM】♤』카지노사이트へ정선카지노룰렛
생중계바카라게임『♤【AGT68。COM】♤』카지노사이트へ정선카지노룰렛
생중계바카라게임『♤【AGT68。COM】♤』카지노사이트へ정선카지노룰렛
필리핀마닐라솔레어카지노『♤【AGT68。COM】♤』카지노사이트い강남안마
필리핀마닐라솔레어카지노『♤【AGT68。COM】♤』카지노사이트い강남안마
필리핀마닐라솔레어카지노『♤【AGT68。COM】♤』카지노사이트い강남안마
카지노딜러자격증『♤【AGT68。COM】♤』블랙잭카운팅프로그램ゐ정선앵벌이
카지노딜러자격증『♤【AGT68。COM】♤』블랙잭카운팅프로그램ゐ정선앵벌이
카지노딜러자격증『♤【AGT68。COM】♤』블랙잭카운팅프로그램ゐ정선앵벌이
카지노노하우『♤【AGT68。COM】♤』토토배팅노하우す카지노규칙
카지노노하우『♤【AGT68。COM】♤』토토배팅노하우す카지노규칙
카지노노하우『♤【AGT68。COM】♤』토토배팅노하우す카지노규칙
블랙잭다운『♤【AGT68。COM】♤』네임드사다리타기ぱ해외스포츠토토
블랙잭다운『♤【AGT68。COM】♤』네임드사다리타기ぱ해외스포츠토토
블랙잭다운『♤【AGT68。COM】♤』네임드사다리타기ぱ해외스포츠토토
토토홀짝『♤【AGT68。COM】♤』정선바카라だ경마사이트제작
토토홀짝『♤【AGT68。COM】♤』정선바카라だ경마사이트제작
토토홀짝『♤【AGT68。COM】♤』정선바카라だ경마사이트제작
카지노사이트『♤【AGT68。COM】♤』드림카지노주소と일야중계
카지노사이트『♤【AGT68。COM】♤』드림카지노주소と일야중계
카지노사이트『♤【AGT68。COM】♤』드림카지노주소と일야중계
바카라사이트『♤【AGT68。COM】♤』슬롯머신원리ば강원랜드
바카라사이트『♤【AGT68。COM】♤』슬롯머신원리ば강원랜드
바카라사이트『♤【AGT68。COM】♤』슬롯머신원리ば강원랜드
에볼루션게이밍『♤【AGT68。COM】♤』라이브바카라게임ざ배팅사이트
에볼루션게이밍『♤【AGT68。COM】♤』라이브바카라게임ざ배팅사이트
에볼루션게이밍『♤【AGT68。COM】♤』라이브바카라게임ざ배팅사이트
Just got the grade tickets back from warehouse
Just got the grade tickets back from warehouse
weekend before labor day we held our annual vintage
weekend before labor day we held our annual vintage
Takeuchi 135 S/N lookup
Takeuchi 135 S/N lookup
before labor day we held our annual vintage Harvest.
before labor day we held our annual vintage Harvest.
just a note one of the owners of a farm I have
just a note one of the owners of a farm I have
바라사트『♤【fgf65558。COM】♤』프토승식ぜ플스카노
바라사트『♤【fgf65558。COM】♤』프토승식ぜ플스카노
equipment but just bought a Claas Jaguar 980
equipment but just bought a Claas Jaguar 980
Demolition, clearing and grading
View attachment 118963
View attachment 118964
View attachment 118965
View attachment 118966 ...
Demolition, clearing and grading
Demolition, clearing and grading
Buying used Kub svl75 vs NH lt185b vs Bobcat t300 or?
Buying used Kub svl75 vs NH lt185b vs Bobcat t300 or?
Buying used Kub svl75 vs NH lt185b vs Bobcat t300 or?
226 hydros lapbelt light flashes
226 hydros lapbelt light flashes
Hydraulic help
The attachment has 4 functions: boom up/down, boom extend/retract, winch one, winch two.
I am trying to figure out the hydraulics at this time. Would like to be able to operate from inside the cab. Looking for suggestions.
Thanks in advance.
Hydraulic help
JLG 600A sputters and dies when hot - Gas Carburated
I bought this used, and found someone had bent the choke blade...I thought that was it! But cleaned the carb and straightened the choke situation and same. It does start better now...
The guy I bought it from did disclose...
JLG 600A sputters and dies when hot - Gas Carburated
JLG 600A sputters and dies when hot - Gas Carburated
600A Platform Swing not swinging
I can push the platform against a tree (with some hydraulic effort by other cylinders) and it does move.
I pulled the platform rotate...
600A Platform Swing not swinging
600A Platform Swing not swinging
muir Hill loading shovel
Muir hill I believe they were called, they used them in the army I believe the body of the genius, they have the laterally believe I believe left, the central arm type telehandler, rigid chassis and steering axles, perkins engine, I also believe 4x 4 wd driving wheels, 4000. 5000 and 6000 models seem bizarre but have the same design as telescopic telehandlers, I'm sorry, I think they would be used for agricultural purposes in ziende and...
muir Hill loading shovel
muir Hill loading shovel
JLG 600A main tower not dropping
Getting tired of jumping down from height...
If it was a limit switch, I would predict...
JLG 600A main tower not dropping
JLG 600A main tower not dropping
Pictures of your Backhoe!!!!!
Pictures of your Backhoe!!!!!
JD 350 part help # AT30145
Part # AT 30145 it is " PUSH BUTTON " the back side of the pump reaching out to see if anyone may have a place to get this part from.
thank you in advance for any help finding this part.
Jake
JD 350 part help # AT30145
941 B Loosing prime
Help, II have a 941B Track loader , that I use occasionally all , in the winter time I changed the Injectors thinking that would help. It started to loose prime. Changed filter , water separator and hand priming pump. No luck it seems to be sucking air . I found no leaks. My last resort is to rebuild the pump. I would like too find a logical reason.
Thank you
941 B Loosing prime
Where are the wrecking balls?
Where are the wrecking balls?
Where are the wrecking balls?
Yanmar B22 Buying Advice
Yanmar B22 Buying Advice
This Corn Was Not Roundup Ready !
samedi 29 juillet 2017
This Corn Was Not Roundup Ready !
used gehl dl6 parts
used gehl dl6 parts
Setting up thumb hydraulics
Setting up thumb hydraulics
Who is seeing youth entering our world?
Who is seeing youth entering our world?
Case 1650
Komatsu 61ex-15, John Deere 700h, or this case 1650k. I...
Case 1650
Case 1650
Working the National 1300A
The next...
Working the National 1300A
Working the National 1300A
1990 Mack em-6 injector pump troubles?
Engine seems to surge/ hunts. Started in the middle areas of the throttle, seemed to go away when wide open, or totally out of the throttle. Got worse and worse
I first thought it was tires or driveline, but tires wouldn't make any difference in and out of the throttle (it stops doing it as soon as you let...
1990 Mack em-6 injector pump troubles?
1990 Mack em-6 injector pump troubles?
Manual for the KOMATSU PC50UU
Someone have a maintenance manual for the komatsu PC50UU? If so, please send me a pdf copy.
I only have the spare part list and is in japanese. I need to make some maintenance and i dont have any reference of the hydraulic filter (they are without reference).
thank you so much.
Best regards
Manual for the KOMATSU PC50UU
Dozer Case 850 C - overhaul problem
Dozer Case 850 C - overhaul problem
Dozer Case 850 C - overhaul problem
2013 Chevrolet Silverado Truck
I want to buy a 2013 Chevrolet Silverado 4X4 truck disel fuel engine. I want to know in its engine system has exhaust diesel fluid. It has a tank under passenger set in outside and refill by this fluid inside hood.
Is there anyone advise me whats the function of this system and how can I refill the tank? And is this fluid needs changing like engine and transmission pil?
Thanks.
2013 Chevrolet Silverado Truck
What do you guys think of this?
Wondering what you guys think of this product? Worth buying?
What do you guys think of this?
Hitachi Ex120-2 got a problem :3 Running very very very fast otherwise engine stalls :(
A have a excavator which model is Hitachi EX120-2
When i pull the hand pilot valve or travel pilot valve slowly then engine stalls easily
but when i pull them very fast then engine ok and excavator works very fast
and in this situation cant operate
what can i do now?
Hitachi Ex120-2 got a problem :3 Running very very very fast otherwise engine stalls :(
Hitachi EX-120 manual
Hitachi EX-120 manual
tl240 accessory wire
to find a power source. I don`t have a wiring schematic.
tl240 accessory wire
Hitachi Ex120-2 got a problem :3 Running very very very fast or engine stalls :(
A have a excavator which model is Hitachi EX120-2
When i pull the hand pilot valve or travel pilot valve slowly then engine stalls easily
but when i pull them very fast then engine ok and excavator works very fast
and in this situation cant operate
what can i do now?
Hitachi Ex120-2 got a problem :3 Running very very very fast or engine stalls :(
Hitachi Ex120-2 got a problem :3
A have a excavator which model is Hitachi EX120-2
When i pull the hand pilot valve or travel pilot valve slowly then engine stalls easily
but when i pull them very fast then engine ok and excavator works very fast
and in this situation cant operate
what can i do now?
Hitachi Ex120-2 got a problem :3
bubbles in hydraulic reservoir sight glass
sight glass. Temps running normal on engine and hyd fluid. No detected leaks on suction side. Ideas are welcomed.
bubbles in hydraulic reservoir sight glass
My CATERPILLAR scale model collection
I have started to take pictures and write small reviews from all my CATERPILLAR scalemodels and put them on the Dutch BMF, short for "Bouw Machine Forum".
If you are interested? Just click on the link:
My CATERPILLAR Scale models
Each time when I have post a new model I will place a single shot on this forum and give you the...
My CATERPILLAR scale model collection
My CATERPILLAR scale model collection
Air leak on fuel injectors
Air leak on fuel injectors
Air leak on fuel injectors
Pictures of my dozer
Willie
Pictures of my dozer
JLG 450A Telescoping boom hose replacement
Long story short: My tenant was in the process of replacing the hoses on the telescoping boom of his 450A when he suddenly passed away last November. I finally had the chance to try and finish the job so I can use the lift and ready it so his wife can sell it, and I'm having a heck of a time snaking the hoses through the boom. Is there any "easy" way or recommended procedure on doing this. I've been trying all day, even trying to pull the old ones through with the backhoe...
Thanks,...
JLG 450A Telescoping boom hose replacement
JLG 450A Telescoping boom hose replacement
Mitsubishi mm30sr
the joy sticks wont work or the spin pedal but the blade and tracks do,
i have exhausted my efforts on what i can do. im new to this machine and would like to make it work so i can use it for my yard.
any help would be greatly appreciated.
thanks casey
Mitsubishi mm30sr
Cat 257B blowing main pump suction line????
About 2 months ago the unit blow the suction line off the main pump. At least I think its the suction line. Its the only soft sided hose going to the main pump. It originates at some sort of valve bolted to the belly pan.
Today, it blew the same line. There is enough pressure in that line to spray oil. Its the pressure that has me scratching my head. Is there a system that creates pressure on the suction side of the pump? I am thinking it...
Cat 257B blowing main pump suction line????
Cat 257B blowing main pump suction line????
Crane service manual/Workshop manual I have
KATO: SR250-V; NK250E; NK550VR; SR300L to 700L; SS500; KR25H-III
KOBELCO: Many Crawler Crane
KOMAT'SU: LW80; LW250...
KRUPP: 30GMT; 70GMT; 100GMT; KMK4080; KMK5110; KMK5120
LIEBHERR: LTM1030; LTM1040; LTM1050; LTM1060; LTM1070; LTM1130; Service_Libherr_Crane - LICCON
LINKBELT: ALL MODELS FOR WHEEL CRANE AND CRAWLER CRANE (5.6GB)
LOAD...
Crane service manual/Workshop manual I have
Crane service manual/Workshop manual I have
Rivers Inlet & other Malloch & Moseley Operations
Rivers Inlet & other Malloch & Moseley Operations
Kobelco hydraulic excavators
vendredi 28 juillet 2017
2) is your machine acting up and not running the way it should?
3) do you require help pin-pointing the root cause of the problem?
4) do you have any unanswered questions?
5) are you looking for manuals specific to your model and by serial number?
please post your topics here. i will do my best to help out.
as i am also sure and gladly invite the other experienced...
Kobelco hydraulic excavators
Kobelco hydraulic excavators
Flags on oversized loads
Flags on oversized loads
Help wanted with track tension spring Cat d4d
Help wanted with track tension spring Cat d4d
Rode hard, put away wet..
Straight 410 Deere John, has 12" and 30" dig buckets, overall well worn and extremely farmerized, just the way I like... Pretty straight though!
Hadn't run in 12 years, all fluids look good, nothing overfull, stuck a battery in yesterday, damn thing flashed right up! Runs good, little blowby, has reverse but no forward, may be digging into the forward clutch pack, we'll see. Hyd have little flow and no...
Rode hard, put away wet..
Rode hard, put away wet..
Cribbing on soft ground (lawn)
The problem is that two outriggers will have to be on a lawn, which is soft ground. A crane driving through this lawn leaves some ruts.
I have two sets of of wood crane pads, one set is 24x24, and another is about 40x40. Do you think that if I use 40x40 and a 24x24 on top, it will be enough?
Thanks
Cribbing on soft ground (lawn)
Wrecking Ball
Any of you guys have experience using one on a excavator?
Wrecking Ball
Is there a fix for a broken crank pulley?
Thanks
Nick
Is there a fix for a broken crank pulley?
Caterpillar attachments ?
Caterpillar attachments ?
More repairs due on this old machine
More repairs due on this old machine
More repairs due on this old machine
New Holland DC100 dozer moves slow
New Holland DC100 dozer moves slow
New Holland DC100 dozer moves slow
New to me 955K
New to me 955K
New to me 955K
Oil change interval
Oil change interval
Case 580CK Boom slowly dropping
My question is this. Is the most likely...
Case 580CK Boom slowly dropping
Case 580CK Boom slowly dropping
Volvo Grader G940 secondary steering issue
Volvo Grader G940 secondary steering issue
Adding wear bars to a worn Hensley bucket on a PC210-10
Adding wear bars to a worn Hensley bucket on a PC210-10
Ford LSG 423 Governor/Actuator Resistance Spec?
Ford LSG 423 Governor/Actuator Resistance Spec?
Junkayrd's work thread.....maybe haha
Junkayrd's work thread.....maybe haha
Junkayrd's work thread.....maybe haha
Komatsu WB-140 2N dies
Komatsu WB-140 2N dies
Komatsu WB-140 2N dies
1988 Cat 953 - Caterpillar. My First Track Loader
Cat 953 was recently purchased to move dirt, brush, level off stuff the skid steer struggled with.
So far It has been a great machine. When turning on the dam the rear of the loader is hanging over the lake. The holes being repaired are deep, big and steep. Pretty much straight down 10 to 12 feet. Not much room to work.
View attachment 91716
The beauty of a track loader. A wheeled...
1988 Cat 953 - Caterpillar. My First Track Loader
1988 Cat 953 - Caterpillar. My First Track Loader
Service code check
2006 D6R III C9 engine
030
0819.02
030
E0179.1
030
E0179.3
113
0299.08
113
0298.02
113
0468.03
113
0588.09
113
1482.04
113
168.04
113
E2115.2
END
"SERV CODE" is shown in the display.
Thanks for the help
Service code check
Diagnosing failure in dual thermostat system
jeudi 27 juillet 2017
Diagnosing failure in dual thermostat system
963
One of the 963 is the original 963 have been checked out by cat oil samples n etc mechanically sounds but need tracks. Got the 3304 motor. Had pictures on my old phone n it died. I'll go back n take more pictures of it soon
It's a nice lookin machine in my opinion n he want 20,000 for machine n I found a shop to put a brand new undercarriage on it for 13000. What is your opinion on...
963
963
Starting Case 580CK in gear
Starting Case 580CK in gear
CAT 330cl error messages
Hello..
Would you please advise your kind answer regarding the following error message got in my CAT 330CL (2006 year) :
Wasserabsch voll.
Thanks & kind regards
Mr. Nour Taha View attachment 171867
CAT 330cl error messages
1985 225 Cat excavator 51U 3208 motor
Fluid level is good. It makes no attempt to swing or travel left track. No change in motor while trying to swing or travel. Right track travels fine, main boom operates fine,
dipper not fully operational.
Any suggestions where to start looking for problem?
1985 225 Cat excavator 51U 3208 motor
Hein Werner C12 HD Excavator
Hein Werner C12 HD Excavator
Hein Werner C12 HD Excavator
New member to the scene.. Wanted to share a few pics with everyone.
New member to the scene.. Wanted to share a few pics with everyone.
Compensated Research for Heavy Equipment users
VuPoint Research, the company I work for, is conducting a compensated research study coming up in the next couple of weeks and I'm hoping someone might be a good fit.
Study 385 is a remote phone study, it is in no way shape or form a sales or marketing ploy. You would not be asked to sign up for anything nor would you be sold anything. For your participation you would be offered $200.00, this would be in check form mailed to your desired mailing address. The phone interview would...
Compensated Research for Heavy Equipment users
Compensated Research for Heavy Equipment users
Buying a dozer
Buying a dozer
Komatsu GH 320-2 Motor Grader Parts
I have a Komatsu GH 320-2 snow grader and it's broken 2 gears of it's final drive, I have checked more suppliers and not available in stock and really it needs too much time and money till casting in Komatsu.
So I want to find them or casting them with non genuine parts (aftermarket) types. Is there any advise with good industrial factory?
Mahammad Aziz
Iraq
Komatsu GH 320-2 Motor Grader Parts
D6Ds in Bolivia - fluid questions
D6Ds in Bolivia - fluid questions
D6Ds in Bolivia - fluid questions
Cat B277 brake won't disengage
Cat B277 brake won't disengage
Cat 321d overheating?
Cat 321d overheating?
Cat 321d overheating?
Track reconnection
Track reconnection
Cat 312 grey heating prob
runs alright. Heat increase is in tandem. Radiator and hyd resevoir both full. Heats up in 15 minutes or so under load. Fan belts good and fan is running. Ideas?
Cat 312 grey heating prob
Welcome!!!
Since I was late in coming up with this forum, existing members are welcome to post as well.
Please put your username in the "Subject Line".
Thanks, and enjoy your stay!
Welcome!!!
Wheel bearing oil and rear end
I have a leaking cover that needs to be fixed...( Wheel bearing on the trailer )
Before I mess with it I want oil on hand.
If my memory is any good...90/140 should work in the Wheels and the rear end on the truck.
Any thing I need to know ?
I don't like to work these much until I've checked the oil levels...
even the ones not leaking.
Thanks for any advise.
Gotta Fly...
JAM View attachment 171848 View attachment 171849 View attachment 171850
Wheel bearing oil and rear end
Clark-Hurth transmission
Dana Spicer Clark-Hurth
Model 12.2HR18312-3
SN ZBEA052620
10/99
Aiming to get a service and repair manual and parts book for this. I have to replace the seal as it is weeping and contaminating the driveline park brake disc..
Should I try a Spicer parts dealer?
Any comments on a Model 18000 manual ... is this correct?
Thanks in...
Clark-Hurth transmission
Clark-Hurth transmission
Software For Tracking Customer Equipment Maintenance?
Software For Tracking Customer Equipment Maintenance?
génie boom problem
I remouve ford LGP engine and replace it for kubota diesel engine from carrier reefer transicold.. all is good but i have no signal on ignition module after start.. i replace alternator wire...supose i need for the rpm on module.. maby the rpm is not the same or i don't know..on my old wire crank sensor and coil (ecm) i have nothing (unplug) beacause i don't need with my...
génie boom problem
génie boom problem
JD 490E Hydraulic System Problem
JD 490E Hydraulic System Problem
JD 490E Hydraulic System Problem
Questions On Forum Functions
Just post a list of functions you would like me to do a detailed explanation on. I want to stay away from questions in this thread as I want to be able to skim through the lists quickly....
Questions On Forum Functions
Questions On Forum Functions
Chinese rotary crusher bucket
I have recently purchased a crusher bucket from China. My rake bucket and thumb were very good so I decided to make another purchase. The bucket has arrived, but no instructions. It has 3 hydraulic hoses, 2 I assume for each motor and one for return to tank or relief?
I was hoping to plumb to the bi directional hydraulic thumb using a T-joiner and a ball valve to stop flow to thumb. But then I realised there are 2...
Chinese rotary crusher bucket
Chinese rotary crusher bucket
I Need A Reality Check. Big Lift With Old Crane.
I might need to unload a planer that weights around 40,000lbs. Unknown exact weight, that's just an educated guess. If anything it'll be less, highly doubt it weighs more than 40k.
I'd be doing it with a 1970's P&H 440TC. 40 ton friction truck crane.
The planer is 9' tall, 28' long and 8' wide, again these arent exact, but close enough for our purposes.
The planer should have holes case through the bed so I can run a rod through, using endless slings it...
I Need A Reality Check. Big Lift With Old Crane.
I Need A Reality Check. Big Lift With Old Crane.
Crane operator friendly site
Thanks
http://craneop.com
Derek
Crane operator friendly site
I got a FREE forklift, but need help indentifying what model it is.....
mercredi 26 juillet 2017
This baby was given to me for free as a "throw-in" when I bought some equipment last year. I found a data plate, but it NOT legible. Some FOOL painted over it, like a big dumbie!! Can anyone help me identify this baby???
I got a FREE forklift, but need help indentifying what model it is.....
Hello for north Texas
Hello for north Texas
Newbie looking for guidance
Newbie looking for guidance
Newbie looking for guidance
JCB 1CX - Have you used one?
This post could be in a number of categories but I'll start in this one as description wise it fits.
I have just purchased a JCB 1CX which is a bit like a 2800kg or 6200lb skidsteer with a backhoe integrated on the rear. The picture makes this a bit clearer. This pic is not mine, I haven't got around to that yet, but it's similar except mine has a 4 in 1 loader bucket.
I was looking, prior to this purchase, for the mythical machine that could load like a skidsteer and...
JCB 1CX - Have you used one?
JCB 1CX - Have you used one?
How do we protect our business data?
How do we protect our business data?
Vehicles With No Electrical System
Does anybody have more specific knowledge of these?
I'm curious how far they took it. Do they use an air starter? Is there an air starter for an old 6.2? Do they have an alternator? The cords make me think they just run battery only.
Looks like they also have an old Dodge.
I think it would be a neat challenge to see how non-electric you could make something like a 1986...
Vehicles With No Electrical System
Vehicles With No Electrical System
Cat 226 won't start
Cat 226 won't start
580k stopped and won't start
Firstly thanks to all the amazing people on this forum with so much knowledge they offer up!
I've just run out of light for today, and the backhoe is about a kilometer from the house, so I'll do more testing tomorrow.
I started it up fine used a little ether as per usual in the cold weather, it was going fine just driving over to the hayshed to pick a bale off the top. It made it most of the way there running fine, and then it just completely cut out. Now it will not start or...
580k stopped and won't start
580k stopped and won't start
Rope accelerator
Rope accelerator
Experience with a 1973 case 450 loader
Experience with a 1973 case 450 loader
Experience with a 1973 case 450 loader
Hitachi EX60URG -Identification of component.
Is it possible anyone can tell me what I have taken a picture of on my Hitachi EX60URG.
It is located just in front of the air-filter, on the start of the pipe that takes the air to the engine. It has (or in this case:
should have) two cables connected to it. One cable has snapped of a while ago, and the other snapped of when I was
checking how to fix it. It seems not to be possible to connect the cables again, so i probably have to by a new one.
What is the function of this part?...
Hitachi EX60URG -Identification of component.
Hitachi EX60URG -Identification of component.
Detroit 60 series issues
Truck idled fine at shop. Went for a test drive bobtail, drove for 15 minutes no problems, ran great.
Hooked onto lowboy trailer, total driving time now of 20 minutes or so, less than a mile from my shop, dies in...
Detroit 60 series issues
Detroit 60 series issues
Help with ASVSR80 bogs down - hydraulic issue?
It seems that unless I really give it the fuel (rpm) the mower doesn't turn very fast and when using the mower and moving the machine the machine is not responding. Like all the hydraulic fuel is going to the mower?
I started off using the little thumb roller to test the mower (it allows me to use the mower but the blades weren't on...
Help with ASVSR80 bogs down - hydraulic issue?
Help with ASVSR80 bogs down - hydraulic issue?
Inscription à :
Articles (Atom)