case 580k

vendredi 31 mars 2017

anyone know where to get some repair manuels for a 1991 case 580k backhoe, just bought it and its been sitting a couple of years

case 580k

Pacific trucks in the logging industy

Post pictures of Pacific trucks in the logging industry.:canada I thought I better close the gap/ring of huge logging trucks so all makes are represented. Here are some LLL P16 models at Port McNeill.

Pacific trucks in the logging industy

Antique Logging Tools or Machinery on Dispay

It seems like most of the towns and villages up and down the Pacific Coast, from California to Alaska have some old logging, construction, or railroad equipment on display. Many of you on this forum are actively working to preserve this history in lots of different places and locations. Trucks- (yes, thats you HDX) Railroad, Construction and all, post your pics here. If they are public displays, give a location so people like me can stop and have a look-see if we get in the neighborhood too....

Antique Logging Tools or Machinery on Dispay

Antique Logging Tools or Machinery on Dispay

CAT Hydraulic Thumb Diverter Valve

I finally bought a Gentec HT1440 thumb. View attachment 166294 I will be putting it on my CAT E70, rebadged Mitsubishi MS070. I had it welded on Friday. Hyd. system pressure is 2490. I'll be putting this relief valve in adjusted to 1800 psi.... View attachment 166293 Can I plumb the thumb relief line back to the tank relief valve View attachment 166295 with a T fitting?

hugs, Brandi

CAT Hydraulic Thumb Diverter Valve

Cat track loader purchase

With my dad buying a belly dump gravel trailer, and me wanting to buy a dozer. I have decided on compromising and have looked for a track loader for the past 6 months. I have finally found one in my price range and the size I need. Digging out creek bed, loading trucks, cleaning out a dugout, cleaning our corrals, digging holes to burry old buildings, pushing bush, and hopefully get jobs from other farms around me.

It is a 2001 CAT 973C with serial number 03RZ00297. I have gotten the...

Cat track loader purchase

Cat track loader purchase

Rear Bucket Quick Attach

What is the down side of a quick attach for a dipper?
Does it cause the dipper to be further away from the original pivot?
Thanks, my search skills are not very good. In fact, very poor is closer to correct.

Rear Bucket Quick Attach

Terex TS14B blower

Hey everyone! Just got a TS14b from an auction. Had some old Euclid S18s with 6110bs in them but never a little 471. The back engine won't shut off with the blower. You flip the lever and I can hear it close and motor slows down but chugs black smoke. It runs at a very low idle. Had to loosen fuel lines to get it off. Any ideas? Could it be a gasket in the box? Or do I need to go into it?

Terex TS14B blower

S7 euclid

i guys i just looking for a little info on the s7 i got to go look at one sometime soon to see about buying but i not a relay a scraper hand more of a young pup. just trying to get my duck in a row as it's a 5h drive to look at it. dose not look to have any welding around the neck, tires have bean up for 2 year so i going to say they will work for me as this will most likely be yard art lol just for play and maybe a show or two. i know it's a power shift but i not sure if it's a conversion...

S7 euclid

S7 euclid

1986 GMC

Hi all! New Guy here!! I bought a 1986 GMC C7000 single axle dump last fall from a guy I work with. I drove the truck for him a few years ago so I have some knowledge of the truck. It has been sitting for a few years so I plan on doing some work to it. The Vin says it has a 427 BBC engine in it. Its back by a 5 speed transmission and a 2 speed rear axle and air brakes. The odometer says 81,096. My question is what oil should I run in the engine? I was thinking about 15w40 but not sure. I am...

1986 GMC

1986 GMC

Puller Rod

Shout out to McMaster-Carr. I needed some hardened threaded rod for pulling some bushings in. Ordered them yesterday about 1:00PM figured they would arrive sometime Monday. When I placed my order it said shipped. Got off work today arrive home and they are on my front porch!! WOW! that is what I call fast shipping.

Puller Rod

More repairs due on this old machine

Had a visit with the back doc again today, lower area is hanging tough with a few hiccups, had one of his cohorts do a Carpal tunnel fix on me last month and that took well where my fingers no longer just go to sleep but today was a shocker. Knew I had neck issues, been getting harder to turn my head left and eventually it started to the right getting more painful as I go. 25+ years ago I was diagnosed with degenerative disc disease and now it has gone full out. C4/5, C5/6 and C6/7 are...

More repairs due on this old machine

More repairs due on this old machine

Genie S60

Is their something that makes the boom faster? Every thing works but the lift is slow.

Genie S60

2001 75 XT noob questions

Hello everyone,
I'm new to this forum and new to owning a skid steer.
I apologize for my ignorance and really appreciate any assistance. I have operated a few Bobcats, Case 1840s and 1845s on occasion but only for a few days at a time. I bought an extremely used 2001 Case 75XT with 6300 hrs that needs some TLC. I have made several repairs and I think I am well on the way to making it reliable. I have not found an operator manual and have a few questions about operation and controls. I do...

2001 75 XT noob questions

2001 75 XT noob questions

06 CAT 277B restoration

Ended up selling my old 74 case 350 crawler loader for this gem. Didnt quite get a super awesome deal, but there was just enough meat on the bone to seal the deal. (12k)

Engine runs, everything works except the high speed track option, it needs a new track, and the engine puffs and misses a little at high rpm-no load; but clears up when actually doing work.

Did I mention the pilot valves are leaking? oh what fun.

Turns out it does have a VE pump, please dont scare me <3...

06 CAT 277B restoration

06 CAT 277B restoration

Kubota V2203 IDI Piston to Bore OEM Clearance

Question for Kubota engine gurus

What is the OEM specified piston-to-bore clearance?

Thanks for replies!

Kubota V2203 IDI Piston to Bore OEM Clearance

1965 P&H Stik-Clam.

I first saw one of these a few years ago at an H.C.E.A show and i thought it was really neat. I was talking to one of my collector buddies earlier this year and the stik clam came up. he said he was familiar with the machine and the owner and he left it at that. A few weeks ago he called and asked if i would be interested in buying a running stik clam.:eek::eek::tong
So, here is my rough but running, one of only 50 or so made and only a few surviving, 1965 POOR AND HOPELESS Stik-clam....

1965 P&H Stik-Clam.

1965 P&H Stik-Clam.

Grapple attachment on John Deere 319d

Hey gang,
Having trouble attaching and detaching the hydraulic lines. Hydraulics are shut off, but still feels like pressure in the lines. Any ideas?
Thanks

Grapple attachment on John Deere 319d

Hitachi EX120-2 - Fuel Filters

I have the manuals for the 100-2 and the 200-2, but not the 120-2. So, I know there is a fuel filter and water separator on this engine. However I have been trying to find the part numbers for them and determine exactly how many are on the machine.

The WIX website gave me the following part number for fuel filters:
33386 - Fuel Filter/Water separator
33343 - Fuel Filter (but this had a (2) in parentheses behind it, does this mean two on the machine?
33525 - Fuel Filter (taller filter,...

Hitachi EX120-2 - Fuel Filters

Hitachi EX120-2 - Fuel Filters

2013 Kubota KX 057-4 mini Excavator

Price : $48,000.00
Year : 2013
Make : Kubota
Model : KX 057-4
Serial # : 21765
Hours : 2715
Engine : Kubota Diesel 47hp V2607
Hydraulic Thumb : Auxiliary Hydraulics
Quick Coupler : 3 Buckets 12'' 18'' 24''
Straight 77'' Dozer Back Fill Blade: Rubber Tracks
Street Mirrors: A/C Suspension Seat
Location : Stirling, NJ 07980
Contact : Jay Trevorrow
Phone : 973-886-3020
Text : 973-886-3020

2013 Kubota KX 057-4 mini Excavator

This JD 450H problem made 2 Deere service managers scratch their heads!

Out of the blue I started my JD 450H and when I put it in forward it would not move. Same thing with reverse but after a minute of so it eventually started to move erratically. Left track moved right track did not. In about a second the right track moved and the left did not (steering left right left right). This went on repeatedly for about 5 minutes until it cleared up and then the machine ran normal for the rest of the day. The next day, same thing. I changed trans filter and made sure...

This JD 450H problem made 2 Deere service managers scratch their heads!

This JD 450H problem made 2 Deere service managers scratch their heads!

Condor Manlift A42RT forward and reverse drive system not working

Hello Manlift Problem Solvers,

I have a 4X4 Condor A42RT Manlift from the late 1990's and it will not drive forward or reverse. I have made sure there is power from the joystick to the main drive pump and to, what I think are the 2 brake solenoids (they have about 3/8" line that runs to each wheel). All other controls work on the machine. It ran about a year ago. I am very perplexed? I did get a manual and wiring diagram from a company out of Minnesota but it doesn't seem to help me. Is...

Condor Manlift A42RT forward and reverse drive system not working

Condor Manlift A42RT forward and reverse drive system not working

Some photos from an apprentice

Howdy! Name's Mike, and I'm an apprentice Heavy Equipment Technician currently on my 8 month co-op from Centennial College. My co-op term is nearly over and I thought I would share some of the things I have been doing, via picture! I warn you, I am a messy worker...but I'm trying to change.

First things first. Had a D6H with a major oil leak and it was also putting out blue smoke. After a good wash and some investigating I found that oil was coming out of the dipstick, indicating...

Some photos from an apprentice

Some photos from an apprentice

790 E LC pump

Pump is staying in full stroke and loading engine

790 E LC pump

stepping motor issues

hey guys im working on a Samsung SE240 LC-3 excavator the stepping motor was replaced due to bad wires and the dial switch that controls it as well. the problem is the step motor will not reach max rpm and I have error codes ER14,ER22 but when I switch from auto to man and use the throttle cable it reaches the max rpm.
Ive checked for correct connection, fuses, grounds I cant seem to find where to check next any help will be awesome plus I don't have any schematic's for this piece of equipment

stepping motor issues

Michigan loaders

Love the the old michigan loaders. I would like to see all the clark or michigan loader photos you guys got. Thanks!:usa

Michigan loaders

Ex120 hitachi fuel?

Got a ex120 with possible fuel problem.
Runs good for bit then stubbles and will barely idle.
It did have collapsed fuel line.
Put inline pump on as well and it's pushing fuel.
Seems to be worse in winter.
Also runs outa fuel at half tank even tho it's half full.
I'm lost.... Looks like simple engine.
I disconnected the roll over shut off or what ever that other cable is.

Please help!

Ex120 hitachi fuel?

Case DL450 ?

Did anyone happen to see it up close and what did you think of it? For me it could be a good solution to my multitasking.
I am sure I probably cant afford it but it is fun to dream and it looks like it has potential.

Case DL450 ?

How to add pics to forum posts

For members who would like information on how to post pictures to the forum, here's a tutorial on how to post pictures using pictures from your computer files, and for posting pics from websites as well. It is our hope that this tutorial provides a usefull resource for the forum members. :)

How to add pics to forum posts

Street repair material recycling question

What we basically have to do is if it is possible to reuse the material from the street repair instead of throwing it away. They say its is practised in so called "western" countries.

What I would like to know what would be the best solution.
Doing all the procesess on the street or in a depot nearby. Probably the crushing part will be the biggest challenge as for the noise. Would you suggest we should use a mobile crusher or a dipper-crusher attached to an excavator as well as...

Street repair material recycling question

Street repair material recycling question

Going to look at and possibly buy a used Cat 262c. Advice on problems to look for?

jeudi 30 mars 2017

2012 Cat 262c. Going to be using it to clear my 40 acres.

What are some things I should look for to determine whether I should buy? Like mechanical problems, etc.

40 acres is mostly brush and cedar trees with some large hardwoods. I'll only be clearing out all of the cedar and brush (which there is a lot, the brush and cedar are very thick).

For the cedars I'm just sawing them down and then using skid to move to a burn pile. Then will use it to clear out all of the undergrowth and thick...

Going to look at and possibly buy a used Cat 262c. Advice on problems to look for?

Going to look at and possibly buy a used Cat 262c. Advice on problems to look for?

My dream build service truck

Well long story short ive had this truck about 6years now. Bought as cab & chassis, made a dump truck for awhile now building service truck. I bought with intentions of building service truck at some point. When things worked out. Anyway ill try get some pics up. From various points of build over that last few months, progress is kind of slow. Sorry hope i can figure out how upload pics

My dream build service truck

new ride

I have been lurking for a couple mounths ,I just upgraded boom trucks (I'll be carefull not to call it a crane seems to be a touchy subject ) so I figured its a good time to join in. I'm a building contractor this makes my fourth boom truck, up grading every time. I got my 2006 32105 elliot with a sitty down thing on it ,on the road last week,I'll send picks when I figure out how to reconfigure pictures.
A big howdy to all that have entertained and educated me
Regards

new ride

Cat D9E 34A

One of my favorite machines. Anyone that has one?

Cat D9E 34A

Cat 463 cable controlled

I have a couple I don't need.

Cat 463 cable controlled

Allis Chalmers 645

Is there anyone acquainted with these machines that I can confer with?

Allis Chalmers 645

I need of a used or rebuild CAT engine (3306) for motorgrader (140G)

Any advise where I can buy a used or rebuild CAT engine (3306) for a motor-grader (140G)

I need of a used or rebuild CAT engine (3306) for motorgrader (140G)

Looking for advice on new excavator

Hey guys, looking for some help deciding which excavator to go with. Looking at either a 2014 cat 336e with between 1300 and 3300 hours or a new link belt 350x4. The cats are priced 235 and 190 respectively, and the link belt has 120 hours as a demo and is priced at 257. I have a 210LX and a 320e, both of which I am keeping. I have had a 2800 And 4300 link belt and liked them both. The 320 I have seems to rock a little compared to the 210.

We have a cat dealer 15 minutes away and link belt...

Looking for advice on new excavator

Looking for advice on new excavator

small grizzly gravel screen project

couple of questions what do your think of this project, YOUR COMMENTS WILL BE GREATLY APPRECIATED.
would like to build a small grizzly screen.
planning on a deck slope of 30 degrees.
will use electric vibrator to shake grizzly bars, like on a dump truck box but vibrator designed to operate continuous.
thinking of the grizzly bars to use, 1 inch round solid bars with 2 or 3 inch spacing between bar edges.
bracing under grizzly bars will be located 18 inch from top of deck then another...

small grizzly gravel screen project

small grizzly gravel screen project

Still going

I've never worked around scrapers. I remember seeing them on jobs when I was a pup, and I posted on this forum before about identifying a couple of 6 wheeled scrapers that MF Esson. I know in the right hands they can move a lot on material, but you never see them around here anymore. Are they used a lot where you guys live?

Still going

955K head gasket

My 955K has a d330c and it keeps blowing the head gasket at number 1 cylinder. The block has been planed and the head is new, does anyone have any ideas?

955K head gasket

AT700B help

I need a wiring diagram for a AT700b do not have a serial # no power to transmission control apc100
can any one help please beau.bowlan@lei-corp.com

AT700B help

GM Diesel 3-53 not starting

Have a backhoe I started two days ago and it was idling when I went to raise the loader bucket, the engine bogged and stalled and been unable to start since. Blowing dark smoke as I turn the motor over and can hear it firing but not enough to start it. Checked the rack and nothing stuck and has fuel.

GM Diesel 3-53 not starting

kx71-3 looking to add flow control to travel circuits

Hello. I'm trying to maximize the usability of my KX71-3 mini ex, and one thing that bothers me is moving sucks the life out of my other motions and controls.

Can I add flow controls on the travel circuit (like those inline one direction flow controls for $30), and when i want to move slower simply dial those way back - giving more flow to everything else? There looks to be two lines off the manifold for each track drive. I'd even be ok if the restriction was in one direction - maybe just...

kx71-3 looking to add flow control to travel circuits

kx71-3 looking to add flow control to travel circuits

deere 70D

i am looking for an excavator for use on my farm. i have found a deere 70d that looks pretty good. can anyone give advice on the 70d or any other machine

deere 70D

how do you repair lift arm bushings on right side of early 580 ck

how do you repair lift arm bushings on right side of early 580 ck

how do you repair lift arm bushings on right side of early 580 ck

Grapple lid?

Is there an attachment that replaces the bucket and looks like a grapple lid which would oppose the thumb. Which company would make something like that? Seems like it would be better than a bucket to grab logs and rocks.

Grapple lid?

New compact track loaders for mulching

I currently run a Cat 299D with a Fecon mulching head and a brush cutter. I'm done with the Cat due to the tracks coming off all the time. I work alone in allot of swampy areas and I'm tired of bringing in a excavator to pickup machine to put a track back on!
Now I'm looking at a new machine. Anyone have any favorites out there?
I work in allot of low land areas, have my share of rocks also.

New compact track loaders for mulching

Cost of concrete paver

Looking at doing concrete road does anyone have any idea the cost for a concrete paver that can pave 7 meter (21 feet) with dowel inserter. Just looking at ball park to the nearest 100,000 is close enough I am just trying to get an idea.

Cost of concrete paver

MULCHER PROBLEM !!!! HELP !!!! Cat 289 with FAE mulcher flow problem.. maybe...

long story short... demoed a 289Cat with Cat HM315 mulcher. worked great!!! Bought used FAE UML SSL 150 (same as HM315 just older) It was setup for a 299Cat and had 1" hoses and quick connects.. replaced 1" quick connects with standard 3/4" but left 1" hoses. I also did nothing to the electrical connector for trap door. ... My question, Will a mulcher that's setup for a Cat 299 work to capacity on a 289? Something is wrong. I am bogging down in very light material. The 289 with HM315 that...

MULCHER PROBLEM !!!! HELP !!!! Cat 289 with FAE mulcher flow problem.. maybe...

MULCHER PROBLEM !!!! HELP !!!! Cat 289 with FAE mulcher flow problem.. maybe...

Using soft slings, what are your your thoughts?

I am not a crane operator, but we use wheel loaders for lifting anything that needs lifting and do use a soft sling occasionally, but mostly chains.

There was an accident in Adelaide yesterday, where a steel beam slipped from a soft sling, killing one worker and injuring another.

What do other members of the forum think about using soft slings in this particular situation?...

Using soft slings, what are your your thoughts?

Using soft slings, what are your your thoughts?

Leaking final drive.

One of the final drives is leaking on my 8 ton kubota excavator. I have never had a final drive leak before. I was wondering how hard/big of a job it is to change the seal and what's all involved . I am hoping to fix it myself.

Thanks.

Leaking final drive.

40Ton American at work

The 40 ton has been busy these days View attachment 162546 View attachment 162543 View attachment 162544 View attachment 162545 View attachment 162548

40Ton American at work

D5G Parking brake issues again!

I am back once again with parking brake issues on my D5G ( SS# WGB03584 ) This time the problem just comes and goes. I can be running it and the parking brake will engage and stop me dead in my tracks. It does show a fault on the dash next to the parking brake light when it does this. The only way to get it to clear, is to shut the machine off and re-start it. I was reading on some other post about how low voltage can be a major problem. I havent had a chance to check it out yet. Any other...

D5G Parking brake issues again!

D5G Parking brake issues again!

Cat 268B Hydraulic/throttle up problem

mercredi 29 mars 2017

I am posting this for a friend who isnt very internet saavy. A customer brought him a 268b skidsteer with an issue of not throttling up. The first story is that cat looked at it and said it needed an injection pump. Going by that this mechanic removed the pump, had it rebuilt and reinstalled. Now the machine idles beautiful, here is the problem. The only way to get the machine to throttle up is to keep the arms or bucket moving. As soon as you stop moving the arms the engine will drop down...

Cat 268B Hydraulic/throttle up problem

Cat 268B Hydraulic/throttle up problem

Highway log trucks.

I was thinking the other day we need a thread for people to show off some highway legal log trucks. Don't get me wrong, I love the off-road hauler threads. Those old beasts are just awesome.
Anyway, fourm member Jdigger4130 sent me these to post. Some nice looking trucks. I need to dig deep and see if I can find the few I have.

Highway log trucks.

Con equip parts problem

Has anyone had any problems getting parts from Con equip parts in New York? It's been 3 weeks since I paid for the parts with my credit card and out of a $1650 bill I've only received maybe $150 worth of it. I've been trying to give the benefit of doubt but I don't like this so far.

Con equip parts problem

Case 621B Center Pivot

Getting the bugs worked out of the 1994 Case I picked up a little while ago, center pivot has some play and seeing as how this setup uses shimmed bearing units for movement and as how this machine was a total rebuild a few thousand hrs ago, is it possible the bearing were shimmed too loose. Everything else about the rebuild seems like it was put together by the apprentice no one liked to help. Most of the repairs I am doing is tweeking and adjusting everything that was taken apart years ago....

Case 621B Center Pivot

Case 621B Center Pivot

ghjnfyjnuyhjkjyufjfu

Beauty And The Beast Watch Online

ghjnfyjnuyhjkjyufjfu

Any Daewoo 130 parted machines?

Looking for control valve (housing or complete) for Daewoo 130 lcv solar , part #2423-1440, any info on parted out machine or leads much appreciated! Thanks

Any Daewoo 130 parted machines?

some work pictures by BuMach

Hey guys,

I have posted some pictures on another thread and they suggested me to open my own thread. So this is gonna be it.

i'm a self employed mechanic from the Netherlands,
started out 3 years ago and business is going strong.

i'm specialised (for as much as it can) in:
- mobile line-boring,
- undercarraige repairs and modifications,
- pin and bushings removale and installing,
- starting to do bucket repairs and modifications.
and all the other repairs that i can do, but...

some work pictures by BuMach

some work pictures by BuMach

takeuchi mini excavator

mini excavator , motor starts , blade works , all other functions do not work , started up and ran fine for 5 minutes, then all functions slowed down / then stopped . old dog

takeuchi mini excavator

Komatsu D155AX-3 Dozer

Hello,
I have a Komatsu D155AX-3 dozer and it has a problem in it's electrical system. Is there any body to advise me?
Thanks.

Komatsu D155AX-3 Dozer

Help with a 3 Cylinder Detroit

Hello all, bought a Gomaco curb machine with a 3 cylinder Detroit in it, it appears it run out of fuel, it cranks over and smokes, but will not fire, any suggestions? Here are some pictures of the engine. Thanks! View attachment 166876 View attachment 166877 are some pictures of the engine. View attachment 166873 View attachment 166872 View attachment 166872

Help with a 3 Cylinder Detroit

Updating old Fat Allis

Well I cannot work on the loader bucket and am limited to lifting weight and needed something to occupy my hands.

I have a mill and lathe so set off to update the old gals electrical system. I have finally tired of recharging batteries after use.
I have a donor machine so stripped a generator mount from it last year, also purchased a eBay 24v single wire alternator and appropriate sized pulley that should last a while for my usage.

Cut down the old mount with the mill at both ends, then...

Updating old Fat Allis

Updating old Fat Allis

information mechanical wheel loader SOBRINO

hello, in an inert milling facility I have seen an old wheel loader, a half wreck, was articulated and rubberized frame, with loader arm with Z rocker system from 10/15 tonnage, the written and the paint were also faded the livery, I think you ciamasse "SOBRINO" know this rotten and these machines, you have news about this unknown brand, thanks

information mechanical wheel loader SOBRINO

the old 580B Question

I have a question on the 580b case, The enine is a 188 and has the im thinking power shuttle, well the starter has a little bolt on the housing between the starter sylinoid, and starter motor, this bolt keeps leaking fluid around it, is this an adjustment bolt? can it be removed and an o-ring put on it to keep it from leaking? I guess a pic would help also ill try to get one


Thanks Mike

the old 580B Question

Case 580 CK rear differential way overfull why?

Hi all. I just bought a Case 580CK and have a bad oil leak coming from the brake cover area. I checked the rear diff oil and it is several inches above the full line. And appeared to be thinner like hydraulic fluid.

I just need to know how it got there?
Is there a seal between the transmishion and the differential that's bad and letting hydraulic fluid in to the diff?

Or did the previous owner put it there?

Case 580 CK rear differential way overfull why?

My first track loader!

On my way to work everyday I had been passing a loader on the side of the road for sale. It looked good from the road. After a few days I decided to stop and take a closer look. It's a Dresser 175C. Much to my surprise it looked fairly good. Lots of life left in her from first glimpse. The seat looked worst of all.

more pictures and details to come...

My first track loader!

Caterpillar PM200? Reviews

Any one have experience with the Cat PM200? I have a chance to buy a 2010 model with 3600hrs. Any reviews or opinions?

Caterpillar PM200? Reviews

Anybody make their own cylinder bench?

I've started to look at building my own cylinder bench and would love to see guys who have done their own to get some idea.

Anybody make their own cylinder bench?

Track press?

I've been looking to purchase a track press to use on our 345. I'd prefer used if anyone can point me in the right direction it would be appreciated.

Track press?

Caterpillar VIMS pc

Is anyone on here pretty smart with computers? I've a few things I want to check out on a 785 that I need VIMS for... on this particular unit the monitor is half screwed up too!
I've got a download of vims but since installation all I get is a print saying unable to connect to VIMS database.
Any ideas?

Caterpillar VIMS pc

Ct322 removing engine

Need to pull this engine. It has a broken fuel rail guide. It is located in the block by the aneroid valve and I don't see any way to get the old one out or do install the new machine new one without removing the engine. Question is does the hydraulic pump mounted to back if engine housing need to be removed or can it stay bolted up. Looking like two of the bolts on the bell housing may
Be a challenge but other then that looks like it's not real bad. Anyone ever remove one of these engines?...

Ct322 removing engine

Ct322 removing engine

Web Site update

Looks real nice.

Truck Shop

Web Site update

Provide genuine replacement parts for komatsu wheel loaders

hello everyone,

we are a factory from china which can provide komatsu Genuine and replacement parts for wheel loaders from WA320 to WA600. Please contact us if you want some parts or need help for technical support.

Sorry the possible inconvenience to you.
Have a nice day.
Clint

Provide genuine replacement parts for komatsu wheel loaders

Provide geniue replacement parts for komatsu excavators

hello everyone,

we are a factory from china which can provide komatsu Genuine and replacement parts for excavators from PC300 to PC1250. Please contact us if you want some parts or need help for technical support.

Sorry the possible inconvenience to you.
Have a nice day.
Clint

Provide geniue replacement parts for komatsu excavators

New Case Mass EX

mardi 28 mars 2017

Just got a newsletter email from Case and saw this. Do they make their own excavators or would this be shared with someone else like JD and Hitachi did?

http://ift.tt/2na25Mu

New Case Mass EX

Building fire breaks with CTL

Bidding a job for 16 miles of fire breaks, was going to use dozer but don't think I can pull that off. I wanted to use the CTL or 2 of them to build the breaks, just curious to see how you'd go about doing that and what attachment would be best. Breaks have been built before, so the ground is just sparse grass. Not much clearing needed. Thanks for the input!

Building fire breaks with CTL

I need help!

I have posted and threaded with little to no responses. on a Kobelco sk300lc mark iv I am having the engine stall out and die . checked the single pump solenoid, and replaced . Is it surpo0se to buzz or click when 24 volts is added. I have power to solenoid and it is new . If I extend any function all the way or stall out hyd s it will kill engine or bogg it down. In d mode it will dig at idle no problem till cylinder rod hits the end of its stroke. then it will stall out engine . Not sure...

I need help!

I need help!

1840 Not Starting

I have posted in the past regarding the cold start solenoid, which I have replaced. Anyway, long story but machine still not running and frustration level high as I'm not mechanical, so learning. I finally have a service manual, and someone coming to give me some help. I'm hoping someone out there can lead me in proper direction. I have changed fuel lines, lifter pump, fuel filter, as previous owner dumped ??? into fuel resulting in it smelling of varathane and machine sat for a long...

1840 Not Starting

1840 Not Starting

Case 580 SM turbo series II oil filter

Does anyone have a fleet guard or other filter number for cross reference for a 2006 Case 580 Super M turbo series II (Iveko engine)? Would be nice to find a local source, rather than travelling 2 hours to the Case dealership. Thanks.

Case 580 SM turbo series II oil filter

Motor Grader V-Pick

I am looking for pictures of front mounted v-picks.I have seen some of the counties in Iowa run them.We have on old front mounted scarifier we would like to make one out of.we also have an old set of sandvicks to mount on it.I would also like to know the ones that run these if you prefer the v-pick type or just a dozer blade type. We already have dozer blades cut down for the graders with just strait blades on them.

Motor Grader V-Pick

Greg's 580B Project

I got a great (my opinion) deal on a 1973 580B. It has a decent cab and does have the Extendahoe (removed for transportation and not in pics). Paid $1000 and it comes with 4 backhoe buckets of various sizes. It has been sitting at a nearby dairy farm parked for about 8 years. Seems there was a slight engine problem. They pulled the pan before they parked it and from what they can tell underneath they thought it was a loose/broken wrist pin. There's other issues - cracked exhaust...

Greg's 580B Project

Greg's 580B Project

Cat 963b won't track straight

Hi I have a caterpillar 963b track loader that won't track straight. It pulls to the right in forward and reverse but once warmed up it will track straight in forward. Also the transmission is making a wining noise. Any thoughts or ideas will be appreciated. Thanks

Cat 963b won't track straight

PC 200-6 Track is running fine then after 10 minutes it gets damm slow

Hi Friends, I am having trouble with my komatsu pc 200-6 once start the machine for 10 minutes the tracks are moving fine after the 10 minutes it seems there no power in the track to move, and again switch off and start the track are fine again after 10 minutes the track gets stuck cannot move. we have checked its track motor, center joint, and track liver assembly also but can't find any solution to improve, would be highly appreciated for providing the support on this. tnq Rajesh my Indian...

PC 200-6 Track is running fine then after 10 minutes it gets damm slow

PC 200-6 Track is running fine then after 10 minutes it gets damm slow

CASE 70XT Skid loader boom & bucket tilt problems

Hello all,

New to this site very first post. I have a CASE 70XT skid loader that I am having issues with the booms and bucket tilt. A few days ago I was scraping the cow lot, when I was done I went to put my pallet forks. Shut off the loader, for a few min and when I started it back up my booms were real sluggish and the bucket tilt will tilt down but will not tilt up. I got in the shop and did a pressure test on it. My pressure is at 600psi. My first thought was the gear pump went out so I...

CASE 70XT Skid loader boom & bucket tilt problems

CASE 70XT Skid loader boom & bucket tilt problems

Just some work pics

Just thought I post up some pics of what I've been up to. Sorry about the sideways pics, I tried rotating them in windows, but it didn't stick.

View attachment 157749

View attachment 157750

View attachment 157751

View attachment 157752

Just some work pics

Volvo L70F transmission vs L70E transmission

Are these 2 transmissions interchangeable ? If not what has to be changed ?

Volvo L70F transmission vs L70E transmission

Im in! Galion 150FA a few small repairs

My first crane. Got her hauled home this morning about 60 miles. Has some things wrong with it but I think it will work out ok. It has a cummins 5.9 turbo in it. Another good thing is that the guy I bought it from had to have the starter rebuilt and a new battery this week before I could test out the machine.

View attachment 166123 View attachment 166124

Im in! Galion 150FA a few small repairs

Bobcat 753 no steering

Hey guys I am new to the forum and new to skid steers, I recently purchased a 753 with problems It will not steer to the left or right. Forward and Reverse seems to be good but when you try to turn it acts as though it wants to turn but will not. I have replaced a leaking drive motor hose and I replaced the control valve seals for the bucket I purchased the case drain filters and plan on checking them tomorrow. This machine has been neglected and is in need of alot of attention. I just dont...

Bobcat 753 no steering

Bobcat 753 no steering

Quickbooks Online

HI, Anybody using QuickBooks Online?
I am just a one man show, just need to Invoice and track Exps.
I have used desktop QB for decades. But Online Concept sounds great. ie Do invoices on site before I leave...
Current accountants say QuickBooksONline not ready yet... too buggy.
Lots of online reviews say same....
BUT Literally was buying new version today at store and met neighbor.... She has been using QBO for 3 yrs no issues....
Anyone have any experience with QuickBooks ONline?

Quickbooks Online

Need business help

We are a 10 year old company and to start this is a little embarsing but I'm now 34 years old and have grew this company from one dump truck to doing over 8 million a year . Here's is the bad side I started this business writing checks doing payroll from my kitchen table. We have now built a office and have full time office help and reciently started quick books to do my accounting. She is old school and we are really struggling on this and where to put what. I can honestly say I have...

Need business help

Need business help

Tiny machine with thumb

The rental joints do not put thumbs on machines smaller then 2 tons in my area. I found a private rental guy who has a tiny kx-008 with a thumb that I rented to do a tiny job my 70 size would not fit in.

This thing was very handy for what I wanted to do, and I see a market for bare rentals in my town with one. I have found an insurer that will cover it and I am experienced in the business end of things, but can anyone tell me why the rental places would not offer something like this...

Tiny machine with thumb

Tiny machine with thumb

EX120, acting up, not running correctly

I responded with this on another thread, but then thought better of piggy backing someone else's thread. Figured I needed to post a new thread and there may very well be two separate issues with these machines.

My EX120 is acting up. I thought mine was a fuel delivery issue and I am still not convinced that it is not a fuel issue.
I have a EX120-2, a couple of weeks ago, I found that one issue that I was having appeared to be that the fuel shut off cable was partially pulled restricting...

EX120, acting up, not running correctly

EX120, acting up, not running correctly

Link-belt 160 LX

I'm in need of a service manual / shop manual and/or parts manual for a Link-Belt 160 LX.

Link-belt 160 LX

D7h paint in transmission

1st gear stopped working so I pulled the transmission to find all the filters Clogged with flakes of paint. The paint from the inside of the transmission is flaking off in places. If I whipe a rag on the remaining paint it's as if the paint is not dry. Any idea what could have caused this? The no 5 clutch pack is worn out and a few seals destroyed hence the no first gear. I am guessing contamination of some sort occurred. Has anyone had this problem before?
Does not seem like it got so hot...

D7h paint in transmission

D7h paint in transmission

Your dozer photos

Let's see everybody's dozers. I would post if I had one.

Your dozer photos

DP Sensor Location, EX120

Where is the DP sensor located? I am having some issues that I am trying to chase down and I am considering replacing the DP sensor. The machine is not at my house so I have limited time with it, and I have been all through the parts illustrations and I cannot find the location of this sensor.

Thanks

DP Sensor Location, EX120

Best place to buy a CAT c1.5

Looking for a Cat C1.5 or perkins 403d-15. Wondering if anyone knows of the best place to find one. Thanks in advance

Best place to buy a CAT c1.5

Anything supposed to be in here?

Is they're supposed to be anything inside of the air cleaner pre-cleaner? any kind of filter element or is it just open like this?

It's off a 67 case 580ck 188 diesel

Anything supposed to be in here?

sevice manuals

looking for technical,workshop manual for cat 320 B

sevice manuals

Service manuals

Hello everybody i have quite a lot of factory service manuals tell me what you need.Thank you.

Service manuals

Another sick Hitachi 120 post

I am struggling with hydraulic/electrical issues on a Hitachi 120 which seems be fairly common based on my reading here. Problems started out with the operator complaining that occasionally the machine would "stop" mid swing, said it would just slam to a stop while rotating but was never able to see it happen myself as it was an intermittent problem but it did seem to increase in frequency as the machine & weather warmed up. The next issue was that it would only track at a very slow speed,...

Another sick Hitachi 120 post

Another sick Hitachi 120 post

D6c cat loss of oil pressure

HI
I lost oil pressure on my d6c cat and now it won't start. Any suggestions?

D6c cat loss of oil pressure

John Deere 710D opinion needed!

Hey guys whats your thoughts and opinions on a Deere 710D? I am looking at one on an online auction. I made the 360 mile drive to go look at it. The machine has 9800hrs on it. Its set up with all that I want 4X4, extendahoe, 2 stick control, cab with heat. Only thing missing is an air conditioner but I think it can be added by using a red dot or carrier aftermarket kit so no biggie there. The transmission works through all the gears and pulls good and strong. The engine does not have...

John Deere 710D opinion needed!

John Deere 710D opinion needed!

Somebody else's project

Hey, im new to this site, got a job wrenching at a local spot. Got someone's leftovers. Anyone have a wiring diagram for an alt for a backhoe/loader . Ill have to wait till tomorrow to get the specs. Thanks for the help.

Somebody else's project

case 445 vs 445 series3 real life differences

Hi,
Looks like I'll be purchasing a new to me case 445 (06) or a 445 series 3. Both machines have very similar hours and both been well maintained. Both come with same options, controls etc. Looks like the series 3 is 12" wider. (6ft vs. 5ft.) Beyond that, what are some of the other real life differences/benefits of one vs. the other. Thanks

case 445 vs 445 series3 real life differences

Kubota V2203 IDI Piston to Bore OEM Clearance

lundi 27 mars 2017

Question for Kubota engine gurus

What is the OEM specified piston-to-bore clearance?

Thanks for replies!

Kubota V2203 IDI Piston to Bore OEM Clearance

Counterweight light lenses kobelco

Does anyone know where to buy the lenses that go over the lights on the counterweights of kobelco excavators besides a dealer?? Repainting machine and wanting to repair the broken lenses. Thanks

Counterweight light lenses kobelco

What tracks should be on my D4?

'67 D4 78A7177. Looking for a used set of chains or tracks. I was told both D4 dozer and 941 loader tracks fit but on further investigation it seems there is more to the story than that. Among the possible variables; dry unsealed pins, dry sealed pins, 1.99" or 2.12" bushing diameters, thick or thin chain link thickness. On something this old there is no telling whats on there currently. What should it have and how do I verify if that is what is on there now?

Thanks!!

What tracks should be on my D4?

Cat 420D cylinder tube scored...

As above my 2002 420D IT dipper cylinder has been drifting on me and I have had to use it as is due to schedule of house build including footers,septic etc.

I finally got the cylinder off and took it apart. First thing I found was that the piston has wear marks and scrapes/gouges. The seals are worn and even torn. Then looking at the bore there are score marks from one end to the other all parallel to each other and about 1.25"'s apart. I did not find a lot of metal but I did find one...

Cat 420D cylinder tube scored...

Cat 420D cylinder tube scored...

1998 Bobcat 863 fuel problem

It just cut off while running fine. After sitting 5-10 minutes will crank, run few minutes, then cut off again. I have changed fuel filter and bled out air. have disconnected fuel supply hose in front of squeeze bulb and connected hose to a can of fuel (to isolate fuel tank). Still does same thing. I can push fuel to the 4 fuel pumps with the squeeze bulb but not past. Any suggestions?

1998 Bobcat 863 fuel problem

Komatsu D65e-6 Questions

Hi everyone,

I see there are some Komatsu dozer enthusiasts/experts on this forum so I have a few questions I hope someone can answer. I'm going to look at a d65 this week and I'm already growing a bit concerned by lack of information and parts availability online. Despite that, I see some positive endorsements on this forum for the D65e-6 series and the price definitely seems like a good deal for the one I'm looking at. I'm going to add some pictures but hoping someone can answer the...

Komatsu D65e-6 Questions

Komatsu D65e-6 Questions

Bobcat X331 leaks around and inside turntable

I bought a X331 off a trader on craigslist. It was leaking when I tested it. I told him to fix the leaks and I'd buy it. His guy "fixed" the leaks ... possibly. He left so much hydraulic oil all over the place that it's been hard to tell how well he fixed things. I've tried to clean/degrease it a bit, but I don't have good access to water at the site where it's at. He's supposedly warrantying this thing against leaks for a month or so. So I need to figure out whether it's in good...

Bobcat X331 leaks around and inside turntable

Bobcat X331 leaks around and inside turntable

D9H refurb: The boring bits

So if you are interested in boring bits of a D9H dozer refurb, you are only slightly less deranged than the person posting such rubbish (me). Here is some photos of the end result of toil this evening. I can only work on the dozer in the evening when the kids are in bed and wife has given up with running cups of tea to the shed, as I work 40 hrs a week in an office job I hate and any spare time the kids are awake is devoted to them. I am working on salvaging any thing I can from the cab, so...

D9H refurb: The boring bits

D9H refurb: The boring bits

Pre Filter for Kobelco SK250LC

Our 2006 Kobelco 250LC is a great machine with one strong dislike. It has only one small fuel filter that requires bleeding every time it gets changed. I saw that the new SK260LC has a pre filter. I got a brainstorm to get that part for our 250LC, haven't checked the price yet. I like it that it has a clear sight glass. Any other ideas,thoughts? View attachment 166787

Pre Filter for Kobelco SK250LC

Lighting

Has anyone upgraded the lighting on there machine. Possibly to LED. If not thoughts????? Thanks

Lighting

ASV RC100 operating speed issue

Hi there, I have a ASV Rc100, that is stuck in hi speed, I'm running out of things to check and replace. so far I have done the following.
Replaced both Drive motors, checked hi/low speed solenoid & shaft, replaced all hydraulic filters, replaced all seals in hand controller. checked all electrical wires for any signs of open wires, check all fuses, and connection in fuse box.
I managed to get it running in low speed for about 5 minutes, went over a bump and i'm stuck in high speed again....

ASV RC100 operating speed issue

ASV RC100 operating speed issue

Wacker compactor acting weird

I have a 3545 wacker reversible gas compactor. I am having a weird problem with it. It runs great and works as normal except when you do left hand turns, it bogs the motor down. And vibration almost comes to a stop.
Going straight forward backward or turning right it works perfect.

I did drop it once perty hard.

I did take the top part of the handle apart. The piston and cylinder wall had some scoring. So I cleaned it up with some emery cloth. Re packed the piston, changed the...

Wacker compactor acting weird

Wacker compactor acting weird

Fiat 70CI. Repairs, modifications and stories.

The intent of this thread is to provide a single point of reference for owners of old Fiat dozers.
There's quite a few of these dozers still out there, hard at work. There's also quite a lot of hard won knowledge out there.
The idea is to try to get some of this knowledge recorded in the one place, rather than locked away in the heads of the various owners and mechanics.
If you have had to repair or modify a 70CI, please record your story for posterity. Images are nice, but not...

Fiat 70CI. Repairs, modifications and stories.

Fiat 70CI. Repairs, modifications and stories.

CFA Piling

Pilingexperts provide the best CFA piling and bored piles services which are usually used for a foundation solution when the condition of the ground is considered fair to good.

CFA Piling

Caterpillar 420d coolant leak

I have a 2004 cat 420d with a coolant leak, it is leaking behind the front gear plate. You only see it start leaking when you rev the engine to a higher rpm.
Looking for anyone that has seen this problem or has a service manual they would like to sell.

Caterpillar 420d coolant leak

Metal debris in a Borg Warner gear box

Good morning

I have found several metal debris in the magnetic canister of a JCB 3CX gray cab (1990) during oil drain.

[​IMG]


The yellow paint particles are due for the inside gear box coloration (no bronze!), The debris area is only one you can see, the rest of canister is clean.
I do not know when the precedent owner did last oil change and the interval hours.
The machine has about 5-6k hours, no bad sound from converter, very good conditions...

Metal debris in a Borg Warner gear box

Metal debris in a Borg Warner gear box

Can you identify these two items?

dimanche 26 mars 2017

Not sure what these are. Can anyone help?

Can you identify these two items?

What do you think about buying this 955L

Hi friends. I want to buy a 955L for loading top soil for gardens to dump trucks only some minutes in a week. I mean not for all day work or near it. This machine i found is half price for here about 4000$ price. seller says engine and gears are fine but undercarriage is worn as you see. do you think is it works fine for my little job, or you say ? Thanks for help.. And machine is :...

What do you think about buying this 955L

What do you think about buying this 955L

What do you guys think of the price for this Case 855D?

http://ift.tt/2nXYEKP

Probably gonna go look at it tomorrow - anything I should keep an eye out for?
thx
Andy

What do you guys think of the price for this Case 855D?

Looking for Hoes or Dynapac trencher parts

Does anyone know of salvage yards with tile trenchers? Looking for sidehill cylinders close the Germany. Who else works with tiling machines? I'm in Iowa and most of the parts come from Northland Trenching, but we are looking for any other sources for Hoes or Dynapac machines.

Looking for Hoes or Dynapac trencher parts

Forward\Reverse Power Reverser Fluid

Does anyone know what fluid should go into a Power Reverser on a Clark BL700 backhoe?

Forward\Reverse Power Reverser Fluid

1700 Owatonna needs variable drive

I would appreciate help in finding a new or used variable drive for a 1977 Owatonna 1700 skid loader. It has the Ford V-4 engine. I have tried a number salvage yards and called several Mustang dealers and have not had any luck.

1700 Owatonna needs variable drive

Anybody run a Bobcat E60

There was a thread not long ago raving about the E50. Wondering if anyone has a 1st hand experience with an E60 and how it compares to the E50. I understand it's a re-badged doosan. I think the extra reach/dig depth with a long arm of the E60 would be of great benefit. Looking to replace an aging JD50C. A JD 60D would be another option. How do they stack up? Have the truck/22K gooseneck trailer to tow something bigger than a 5 ton. I think a 6 ton or even a 7 ton would be a bit better...

Anybody run a Bobcat E60

Anybody run a Bobcat E60

2001 75 XT noob questions

Hello everyone,
I'm new to this forum and new to owning a skid steer.
I apologize for my ignorance and really appreciate any assistance. I have operated a few Bobcats, Case 1840s and 1845s on occasion but only for a few days at a time. I bought an extremely used 2001 Case 75XT with 6300 hrs that needs some TLC. I have made several repairs and I think I am well on the way to making it reliable. I have not found an operator manual and have a few questions about operation and controls. I do...

2001 75 XT noob questions

2001 75 XT noob questions

Anybody make their own cylinder bench?

samedi 25 mars 2017

I've started to look at building my own cylinder bench and would love to see guys who have done their own to get some idea.

Anybody make their own cylinder bench?

Trade it off or fix it up? Deerw 304H

We use a compact wheel loader to mix feed for our dairy cows, and this machine needs to run every single day totaling up about 2500 hours a year.

Currently, we have a high hour Deere 304H that has been a nagging thorn in our side since we got it 18 months ago. Machine has a touch over 13,000 hours. In general, this machine is tight, engine runs and starts excellent, and it's the right size for the application. The down side: plagued with high hour nickel and dime repairs that lead to...

Trade it off or fix it up? Deerw 304H

Trade it off or fix it up? Deerw 304H

A few projects I have done recently

Thought I would post some pics and commentary on some jobs I have done recently.

This project was an interesting one. A frozen food processing facility was installing a new cooler. Problem was the building had a high water table underneath the slab where the new cooler was going. Our job was to excavate 22" of very sticky, very wet clay and replace with woven geotextile fabric and #57 stone to separate the water from the -10 F degree cooler that would sitting on top of it. The...

A few projects I have done recently

A few projects I have done recently

Buying Equipment Online

Hello,

I am just wondering if it is safe or within reason to buy equipment via online without seeing it in person.

For example, if I am in Oregon and I see a good deal online for a loader in New York and I did not want to fly out there I could just do the transaction online.

What do you think about buying online? Is it even heard of?

Thanks in advance,
Regards

Buying Equipment Online

Memories for us old truckers

Oxbow started this thread at the HTF forum.

Truck Shop



Memories for us old truckers

aswrawefsd

Linares vs Crolla Live Stream

aswrawefsd

This JD 450H problem made 2 Deere service managers scratch their heads!

Out of the blue I started my JD 450H and when I put it in forward it would not move. Same thing with reverse but after a minute of so it eventually started to move erratically. Left track moved right track did not. In about a second the right track moved and the left did not (steering left right left right). This went on repeatedly for about 5 minutes until it cleared up and then the machine ran normal for the rest of the day. The next day, same thing. I changed trans filter and made sure...

This JD 450H problem made 2 Deere service managers scratch their heads!

This JD 450H problem made 2 Deere service managers scratch their heads!

jklasd guas glas gliausgf

Portugal vs HungaryLive Streaming

jklasd guas glas gliausgf

jcb js 130

hi we have a js 130 2008,last week the l/h track forward stopped working(new motor fitted june last year) , well slowed down , now it has stopped , reverse ok
r/h track is normal .any ideas thank you

jcb js 130

Kobelco hydraulic excavators

1) are you having trouble searching for new o.e.m., remanufactured, reconditioned, or new aftermarket replacement parts?
2) is your machine acting up and not running the way it should?
3) do you require help pin-pointing the root cause of the problem?
4) do you have any unanswered questions?
5) are you looking for manuals specific to your model and by serial number?

please post your topics here. i will do my best to help out.
as i am also sure and gladly invite the other experienced...

Kobelco hydraulic excavators

Kobelco hydraulic excavators

alsdiu lasiud lausgd lawdg

Bulgaria vs Netherlands Live Streaming

Bulgaria vs Netherlands Live Streaming

Bulgaria vs Netherlands Live Streaming...

alsdiu lasiud lausgd lawdg

alsdiu lasiud lausgd lawdg

2017 Conexpo/Conagg

It's time again to start making plans for the big show.

I'm planning on going and as we have done in the past we've had a meet and greet of HEF members.

So anyone going chime in and let's see if we can put something together. Looking forward to it.

2017 Conexpo/Conagg

Looking for input on a small portable crusher plant

I am looking at getting in to the portable crushing business and am looking for input. My area is extremely rocky (basalt) and just about any excavation results in a lot of excavated rock. Big projects are using large onsite crushing plants (multiple trailers, etc.). There are only a few large plants and they are tough to get.

My thought is it have a smaller, self-contained plant in the 50-100 ton/hr size for use on smaller projects. Local contractors tell me there is a demand for such...

Looking for input on a small portable crusher plant

Looking for input on a small portable crusher plant

luiawg diuw liug wug

Sweden vs Belarus Live Streaming

Sweden vs Belarus Live Streaming

luiawg diuw liug wug

Diesel in the coolant Bobcat 753

There is diesl fuel in my coolant. What are the possible causes of this?

Diesel in the coolant Bobcat 753

New to me JD 790D LC

Howdy!

Been away from the forum for a while, bought a quarter section of raw land recently and just got a 790D to clear etc with.

She's a project but overall in decent shape, it's a very basic machine (no electronics) which I like!!

I'm wondering if anyone out there has a wiring diagram?

Going to buy a service manual eventually but just need to get the wiring sorted for now.

If anyone is interested in some pics just let me know and I'll take some.

Thanks!

New to me JD 790D LC

drgjsrj jdgj dfhd jdfrgj ddrj

Sweden vs Belarus Live Streaming

Andorra vs Faroe Islands Live Streaming

Switzerland vs Latvia Live Streaming

Bulgaria vs Netherlands Live Streaming

Luxembourg vs France Live Streaming...

drgjsrj jdgj dfhd jdfrgj ddrj

drgjsrj jdgj dfhd jdfrgj ddrj

Abondoned TD18A US Navy Crawler/Dozer

I was out in the County yesterday and came across this old dozer. It sits maybe 50 yards off the dirt road but was well hidden by a couple cedar trees. I caught a glimpse of it as I drove by and had to go back for some pictures and a video.
It is a a 1953 TD18A International Crawler. It is a retired US Navy Machine that found its way into the Arkansas back woods at some point. Looks like it blew a head gasket or something and was left to rot. Really neat old crawler with a Bucyrus Erie...

Abondoned TD18A US Navy Crawler/Dozer

Abondoned TD18A US Navy Crawler/Dozer

Still going

I've never worked around scrapers. I remember seeing them on jobs when I was a pup, and I posted on this forum before about identifying a couple of 6 wheeled scrapers that MF Esson. I know in the right hands they can move a lot on material, but you never see them around here anymore. Are they used a lot where you guys live?

Still going

955L track tensioner piston removal w/o separating the tracks

Can you tell me if you can remove the track tensioner piston on a 955L without separating the tracks? I would like to replace the rings and seals on the piston to see if my continual loosening of the tracks stops.

955L track tensioner piston removal w/o separating the tracks

Junkayrd's work thread.....maybe haha

While I don't do stuff near as cool as most of you I figured I'd start showing what I do on a regular basis. I'd like to name my favorites on here, but being a father of five I've learned to avoid hurt feelings haha. I manage equipment for a small excavating company. We run a D11N, D7R, D5G, D65, Steiger 485 HD with two 19 yard pans, two 210 Linkbelts, 110 SD roller, champion grader, 627B and a couple water trucks. I do all the service work and 99% of the repairs. Just did steering...

Junkayrd's work thread.....maybe haha

Junkayrd's work thread.....maybe haha

underground grader

Some manufacturers built underground grader. Fermel for example. Fermel has two types:
http://ift.tt/1EI8xJR
http://ift.tt/1FgQyOe

underground grader

Repairing Leaking Lift Ram

I had a lift ram let go due to a damaged gland nut. I had to replace both the gland nut and all the seals. It's a pretty easy job and I have attached a few pictures. Cheers. View attachment 166718 View attachment 166719 View attachment 166720 View attachment 166721

Repairing Leaking Lift Ram

Subsistence Bulldozer Pond Excavation in Africa

View attachment 166192 View attachment 166195 View attachment 166196 View attachment 166197 Got a few pictures to share about a very small scale pond digging project that has been inching along over the years, as I endeavored to revive three ancient Cat LGP tractors, without winding up in the poor-house from getting nickel and dimed to death in the process. Of my collection of old Cat Dozers, the D7G LGP has the smoothest running engine, and thus was the one I chose...

Subsistence Bulldozer Pond Excavation in Africa

Subsistence Bulldozer Pond Excavation in Africa

955k block/crank

vendredi 24 mars 2017

Just got the news that 955k 85J7905 block is shot. Looking for used block/crank.
Thx in advance

955k block/crank

D6R Transmission Test

Hello All. Please i'm having problem testing the D6r bulldozer transmission i just repaired using High pressure Air. the gears are not engaging when i put the pressure hose on the valve holes. When i did this with my D8r bulldozer in 2013, it gave me good result. I want to know if this is okay with the d6r transmission as this one is electrical and that of the d8r is manual or is there something wrong in what i have repaired? The number one gear springs just a little and returns back. Or is...

D6R Transmission Test

D6R Transmission Test

roller blade?

any body ever use one of these box blade setups with a big roller following behind,saw one that even had pad foot setup on the roller.if so just wondering how it worked??

roller blade?

Kato HD 900 SEV slow operaion

Hi all I need some help with a Kato HD 900SEV digger S/n 900514sw
the machine has pilot operated controls for the main attachments and uses cables to operate the travel spools
the problem is when machine warms up the functions on the left hand joystick go slow. operating the right hand joystick improves the slow functions. i suspect the pump signal system but do not know how it operates as the pilot lines go directly to the main control valve .there also appears to be no pilot pump as such....

Kato HD 900 SEV slow operaion

Kato HD 900 SEV slow operaion

Section for komatsu d20,21 and similar grey market dozers

I created this thread to hopefully discuss komatsu dozers, in order to help people like myself that have a komatsu dozer and have questions about them.

Section for komatsu d20,21 and similar grey market dozers

Lull 1044C-54 Hydraulic Problem

Hello I'm am in need of some assistance in repairing our LULL. Its a 2003 1044C-54 Serial 18942 3700 hours (sat for a bit outside)
Upon start up cold it has slow and very limited use of the hydraulic functions.
The boom will go up slow and if you increase the RPMS on the engine, it will cut out the hydraulic pressure till you let it idle again and then it will go up slowly. The frame tilt is real bad. You barley crack the lever to get any movement at all from it.
the problem straightens...

Lull 1044C-54 Hydraulic Problem

Lull 1044C-54 Hydraulic Problem

D5G Parking brake issues again!

I am back once again with parking brake issues on my D5G ( SS# WGB03584 ) This time the problem just comes and goes. I can be running it and the parking brake will engage and stop me dead in my tracks. It does show a fault on the dash next to the parking brake light when it does this. The only way to get it to clear, is to shut the machine off and re-start it. I was reading on some other post about how low voltage can be a major problem. I havent had a chance to check it out yet. Any other...

D5G Parking brake issues again!

D5G Parking brake issues again!

GM Diesel 3-53 not starting

Have a backhoe I started two days ago and it was idling when I went to raise the loader bucket, the engine bogged and stalled and been unable to start since. Blowing dark smoke as I turn the motor over and can hear it firing but not enough to start it. Checked the rack and nothing stuck and has fuel.

GM Diesel 3-53 not starting

Case 580 CK rear differential way overfull why?

Hi all. I just bought a Case 580CK and have a bad oil leak coming from the brake cover area. I checked the rear diff oil and it is several inches above the full line. And appeared to be thinner like hydraulic fluid.

I just need to know how it got there?
Is there a seal between the transmishion and the differential that's bad and letting hydraulic fluid in to the diff?

Or did the previous owner put it there?

Case 580 CK rear differential way overfull why?

Studying improving experience for repairing machines

Hi my name is Tom, new member, I'm a student at University of Illinois Chicago. We are looking at how people repair heavy equipment and finding ways to improve the experience of everyone from technicians and engineers at larger companies to self-employed contractors.

We are specifically looking at:

How people identify a specific problem in a machine.
How a defective part itself is then identified (via serial number of part, finding it in physical manuals, etc).
How that part is ordered....

Studying improving experience for repairing machines

Studying improving experience for repairing machines

Need engine help - perkins / CAT 3CYL engine won't start

Have 400psi compression in all cylinders, new injectors, working glow plugs, and fuel shutoff solenoid is disengaging as it should

machine cranks and cranks with white unburn fuel smoke spewing out but will not start combustion.

Need engine help - perkins / CAT 3CYL engine won't start

Opinions on Gehl 5635sx

Hi everyone.

This is my first post.

About 5 years ago I purchased a brand new kioti ck27 tractor with FEL to maintain my 14 acre property. I've been very happy with it overall but I find that I need more machine. I pretty much only push snow with it and use the loader in summer to lift trees for firewood and that kind of thing. I often borrow a skid steer as my tractor doesn't dig well and won't lift a ton..

My tractor at 5000lbs has a rough time pushing through the hard drifts...

Opinions on Gehl 5635sx

Opinions on Gehl 5635sx

AustinWestern pacer 300

Hello All, Regarding A 1969 Austin Western Pacer 300, does anyone know if the fine spline constant velocity joint, that is in the steering knuckle on the rear axle, interchanges with the one on the front axle? Are there certain years of the Clark branded graders that share this part? What range of years could be a donor machine for this part? I'm searching for this part for my machine. Thanks for any help.

AustinWestern pacer 300

Bucyrus Erie 22b boom inserts

Does anybody know where I can get some boom inserts for a 1956 Bucyrus Erie 22b with the bolt together angle boom fairly cheap? I was given this machine as a restoration project so it's not like it's going to be making money for me, but I've got a few projects around home that I could use a little more boom to reach.


Thanks.

Bucyrus Erie 22b boom inserts

2005 bobcat T190, foot pedal model, won't lift arms but allows bucket tilt.

hey guys, I'm new here and am having a problem with my 05 bobcat t190 with 2200 hours on it. 3 weeks ago I started it up, let it run and went through the motions of testing everything....and everything checked out.

The unit sat for 2 weeks, went to go get ready for the snow and pulled the skid out of my garage, started it up, and the left pedal won't release, it's as if it is locked up but the tilt works fine.

so I tested voltage at the spool lock relays, both were getting voltage. I...

2005 bobcat T190, foot pedal model, won't lift arms but allows bucket tilt.

2005 bobcat T190, foot pedal model, won't lift arms but allows bucket tilt.

Ford 4500

An old friend died. His grandson bought his Ford 4500 backhoe. The swing tower has been neglected way too long. The bottom bushing wore out forever ago. It wore until pressure caused cracks in the metal where the bottom bushing should be. It landed in my lap today. Can anyone tell me what this metal is. It appears to be cast, but has factory looking welds on it.
Options as I see them are to weld to build it up, then line bore, or cut it off, and weld on freshly machined steel in its place....

Ford 4500

Ford 4500

Mobark engine

a friend of mine is rebuilding the engine in his chipper. I don't have any numbers except the motor is a cat 3054 with dry sleeves. We trying to figure out how the sleeves are removed or what tools are needed.

Mobark engine

How to get track back on rear sprocket??

Hi All,
Last night the left track came off the rear drive sprocket on my CAT 314.
I've looked at a bunch of utube videos, and would like to know the best way to proceed--- in the utube videos its real variable how people get the track back on-- bucket teeth, chains, etc. All of them seem to suggest releasing track tension and blocking up the machine on the side where the track is off. I'm doing this alone.
Some guys in those tubes are pretty rough with bucket teeth on the pads-- can't you...

How to get track back on rear sprocket??

How to get track back on rear sprocket??

Somebody else's project

jeudi 23 mars 2017

Hey, im new to this site, got a job wrenching at a local spot. Got someone's leftovers. Anyone have a wiring diagram for an alt for a backhoe/loader . Ill have to wait till tomorrow to get the specs. Thanks for the help.

Somebody else's project

What is the Brake shoe thickness specification for a Case 580CK

Just like the title says What is the Brake shoe thickness specification for a Case 580CK?

My brakes where not working at all. Pulled it apart and they where covered in oil. After a good cleaning the brakes shoes and discs look fine and like they would have enough meat left. But figured I had best check before reinstalling it all.

What is the Brake shoe thickness specification for a Case 580CK

Case 621B Center Pivot

Getting the bugs worked out of the 1994 Case I picked up a little while ago, center pivot has some play and seeing as how this setup uses shimmed bearing units for movement and as how this machine was a total rebuild a few thousand hrs ago, is it possible the bearing were shimmed too loose. Everything else about the rebuild seems like it was put together by the apprentice no one liked to help. Most of the repairs I am doing is tweeking and adjusting everything that was taken apart years ago....

Case 621B Center Pivot

Case 621B Center Pivot

Wacker compactor acting weird

I have a 3545 wacker reversible gas compactor. I am having a weird problem with it. It runs great and works as normal except when you do left hand turns, it bogs the motor down. And vibration almost comes to a stop.
Going straight forward backward or turning right it works perfect.

I did drop it once perty hard.

I did take the top part of the handle apart. The piston and cylinder wall had some scoring. So I cleaned it up with some emery cloth. Re packed the piston, changed the...

Wacker compactor acting weird

Wacker compactor acting weird

Replacing single track shoe

Hi,
I just bought a dozer that has a few missing or bent track shoes. The remaining shoes are at about 50% so i hate to replace all of them at this point. Is there any issue with having a few shoes with 100% grousers? I could see it potentially stressing the chain in that area if the tracks slip and it catches something solid. Am i over thinking this?

Replacing single track shoe

Cleanout Bucket Size for EX50U

I need to purchase a cleanout bucket and wondering what the pros/cons you all have of a 36" vs 48"? Essentially it'll be used for grading, foundation work general finishing while my toothed 24" will be my main digger. Machine is a Hitachi EX50U 10,000LB class.

Cleanout Bucket Size for EX50U

Looking for Case 1450 Parts Machine

I am looking for a Case 1450 parts machine if anybody knows of one. Thanks

Looking for Case 1450 Parts Machine

Vin location on Case 1450 Dozer

Hi guys, my vin plate is gone on my Case 1450 dozer, and I need to get some parts for it. Is there another location stamped into the frame somewhere? Very frustrated!

Vin location on Case 1450 Dozer

Diffrence between expensive and cheap hydraulic oil?

Hey everyone, Been in the earth moving game for a few years but have always been lucky to work for moneys no object company's with the best of everything. Now I'm out on my own things are different.

What I was wondering was how much of a difference is there between expensive and just normal hydro oil? I'm sick of paying $170 aud for 20L Drum, So I'm looking at getting a 202L drum. Some brands are in excess of $1500 a drum but then there's a few that Ive noticed on a local page for around...

Diffrence between expensive and cheap hydraulic oil?

Diffrence between expensive and cheap hydraulic oil?

Angle Blade vs. Straight Blade on Mini Ex

I'm going to order a Kubota U55 soon and was wondering if an angle blade is worth an extra $2500 over a straight blade? The excavator will only be for personal use on my 10 acre lot doing stuff like pulling stumps and maybe making a trail around the perimeter of my heavily wooded property.

Angle Blade vs. Straight Blade on Mini Ex

THURSDAY Expert +91- 8890248080 black magic Vashikaran specialist Molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

THURSDAY Expert +91- 8890248080 black magic Vashikaran specialist Molvi ji

THURSDAY Expert +91- 8890248080 black magic Vashikaran specialist Molvi ji

मौलाना +91- 8890248080 Mohini vashikaran specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

मौलाना +91- 8890248080 Mohini vashikaran specialist molvi ji

मौलाना +91- 8890248080 Mohini vashikaran specialist molvi ji

L'O'V'E' +91-8890248080 black magic mantra For love specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

L'O'V'E' +91-8890248080 black magic mantra For love specialist molvi ji

L'O'V'E' +91-8890248080 black magic mantra For love specialist molvi ji

A.S.T.R.O.L.O.G.E.R=)) 8890248080 love problem solution specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

A.S.T.R.O.L.O.G.E.R=)) 8890248080 love problem solution specialist molvi ji

A.S.T.R.O.L.O.G.E.R=)) 8890248080 love problem solution specialist molvi ji

MagIC BLaCk ~~8890248080 someone special vashikaran specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

MagIC BLaCk ~~8890248080 someone special vashikaran specialist molvi ji

MagIC BLaCk ~~8890248080 someone special vashikaran specialist molvi ji

V\A\S\H\I\K\A\R\A\N +91 8890248080 Girl Vashikaran specialist Molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

V\A\S\H\I\K\A\R\A\N +91 8890248080 Girl Vashikaran specialist Molvi ji

V\A\S\H\I\K\A\R\A\N +91 8890248080 Girl Vashikaran specialist Molvi ji

Expert Molvi ji +91-8890248080 kala jadu vashikaran specialist Molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

Expert Molvi ji +91-8890248080 kala jadu vashikaran specialist Molvi ji

Expert Molvi ji +91-8890248080 kala jadu vashikaran specialist Molvi ji

MR. BARKAT ALI KHAN +91- 8890248080 inter caste love marriage love back specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

MR. BARKAT ALI KHAN +91- 8890248080 inter caste love marriage love back specialist molvi ji

MR. BARKAT ALI KHAN +91- 8890248080 inter caste love marriage love back specialist molvi ji

Vision Love vashikaran +91-8890248080 black magic specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

Vision Love vashikaran +91-8890248080 black magic specialist molvi ji

Vision Love vashikaran +91-8890248080 black magic specialist molvi ji

IN Door / Out Door Just Call+91' 8890248080 love problem solution molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

IN Door / Out Door Just Call+91' 8890248080 love problem solution molvi ji

IN Door / Out Door Just Call+91' 8890248080 love problem solution molvi ji

मौलाना BARKAT ALI KHAN +91- 8890248080 Love marriage Vashikaran specialist Molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

मौलाना BARKAT ALI KHAN +91- 8890248080 Love marriage Vashikaran specialist Molvi ji

मौलाना BARKAT ALI KHAN +91- 8890248080 Love marriage Vashikaran specialist Molvi ji

M.I.N.E-S.T.O.N.E- 08890248080 kala jadu ( jadoo ) specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

M.I.N.E-S.T.O.N.E- 08890248080 kala jadu ( jadoo ) specialist molvi ji

M.I.N.E-S.T.O.N.E- 08890248080 kala jadu ( jadoo ) specialist molvi ji

F:A:S:T- Vashikaran +91- 8890248080 black magic Specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

F:A:S:T- Vashikaran +91- 8890248080 black magic Specialist molvi ji

F:A:S:T- Vashikaran +91- 8890248080 black magic Specialist molvi ji

मौलाना +91- 8890248080 love ka magic | love vashikaran specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

मौलाना +91- 8890248080 love ka magic | love vashikaran specialist molvi ji

मौलाना +91- 8890248080 love ka magic | love vashikaran specialist molvi ji

L'O'V'E' B|A|C|K +91-8890248080 Vashikaran mantra specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

L'O'V'E' B|A|C|K +91-8890248080 Vashikaran mantra specialist molvi ji

L'O'V'E' B|A|C|K +91-8890248080 Vashikaran mantra specialist molvi ji

A.S.T.R.O.L.O.G.E.R=)) 8890248080 love marriage problem solution specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

A.S.T.R.O.L.O.G.E.R=)) 8890248080 love marriage problem solution specialist molvi ji

A.S.T.R.O.L.O.G.E.R=)) 8890248080 love marriage problem solution specialist molvi ji

MagIC BLaCk ~~8890248080 Girl Boy vashikaran specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

MagIC BLaCk ~~8890248080 Girl Boy vashikaran specialist molvi ji

MagIC BLaCk ~~8890248080 Girl Boy vashikaran specialist molvi ji

MagIC BLaCk ~~8890248080 Girl Boy ( someone ) special vashikaran specialist molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

MagIC BLaCk ~~8890248080 Girl Boy ( someone ) special vashikaran specialist molvi ji

MagIC BLaCk ~~8890248080 Girl Boy ( someone ) special vashikaran specialist molvi ji

Love V\A\S\H\I\K\A\R\A\N +91 8890248080 black magic specialist Molvi ji

Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your problem, but in fact takes your problems of life...

Love V\A\S\H\I\K\A\R\A\N +91 8890248080 black magic specialist Molvi ji

Love V\A\S\H\I\K\A\R\A\N +91 8890248080 black magic specialist Molvi ji

Friday Expert Molvi ji +91-8890248080 black magic specialist Molvi ji

World Best astrologer Mr. Barkat Ali Khan



Just call on this number and get solutions.!! +91-8890248080

The astrological world also involves the black art methods, vashikaran techniques, wazifas, dua, spells and various other practices to eradicate the troubles of life. It lets you reach to your destination without any inch efforts. The fruitful results are gathered from the transparent practices of the astrology. The good astrologer is a one who not only gives you a solution for your...

Friday Expert Molvi ji +91-8890248080 black magic specialist Molvi ji

Friday Expert Molvi ji +91-8890248080 black magic specialist Molvi ji

D9H refurb: The boring bits

So if you are interested in boring bits of a D9H dozer refurb, you are only slightly less deranged than the person posting such rubbish (me). Here is some photos of the end result of toil this evening. I can only work on the dozer in the evening when the kids are in bed and wife has given up with running cups of tea to the shed, as I work 40 hrs a week in an office job I hate and any spare time the kids are awake is devoted to them. I am working on salvaging any thing I can from the cab, so...

D9H refurb: The boring bits

D9H refurb: The boring bits

Genie GS1930 will not lift two people

The Genie GS1930 scissor lift will work with one person seeming just fine but will not go up with two people in it. Did find older thread on this too which was very helpful. Tested pressure at test port at about 2400lb. On the valve block turned system relief valve and lift relief valve all the way in (about 3 turns) and pressure only increased to about 2600lb-2700lb. Still will not lift two people. Book said to set at 1800 to 3700. Took apart the adjustable relief valves and found no...

Genie GS1930 will not lift two people

Genie GS1930 will not lift two people

Which is better, v blade or KG?

mercredi 22 mars 2017

let the opinions fly, looking at cutting a timber logged 8 years ago, like to use D65-15 as I have that tractor. Will it perform? Heavy enough? Read that D7Es and Gs worked well but 8H and K are more weight for better grunt and the D9 is unstoppable. Really not looking to buy a bigger machine if the 65 will perform well enough to shear so many acres a day. Which blade would give better performance at shearing acres?

Which is better, v blade or KG?

Track tension adjuster question

I recently bought a new machine(new to me) & I do not know how to tighten the tracks. I am used to just using a grease fitting to adjust tracks but this machine has something different. Check out the picture I included. Any info on what this fitting is would be very beneficial as the tracks need tightened up. Thanks in advance!

Track tension adjuster question

New service truck

Two years ago I got a f450 service body with no crane. The truck sits at 18000lbs and is 1500lbs over weight. I am looking at a new truck and think a f550 is too small.

I now take care of 5 excervator 4 skid steers 2 wheel loader cv 50 screen. 4 lulls 2 man lifts 3 trailer up to 30 ton 10 truck from 350 to kw. Various attachments and smaller pieces of equipment

I have 6000lbs of tools on the 450 and anther 2000lbs on the selves at the garage. Would a 25999 truck be big enough or would u....

New service truck

New service truck

YAMNAR ENGINE COOLANT LEAK ON A TB016

This problem is on a Takeuchi excavator tb016 2003 with a Yamnar TNE 3-68.engine. Maybe some one can help me... After sitting for 4 month, I notice that there is a small leak of coolant, droplets, on the bolts that hold the engine oil pan on the fuel pump side.It is very difficult to see around the coolant pump, but the drain of the pump is dry so it is not by the seal of the pump. Every other place seems dry. Any one could give me some advice ? thank you for yours comments. Ronald.

YAMNAR ENGINE COOLANT LEAK ON A TB016

Finally learned how to post pics.

View attachment 158046
This is our tms300. Grain was supposed to be 115' tall. Decided it needed to be 135' tall. Had the 110t there to set the dryers so we just set the head with it.
View attachment 158047
Truss set here. Tms300 again. I ran out of cribbing. That pic is after they dug a 3' hole in the driveway for the back of the crane.
View attachment 158053
Last one for tonight. The 110t setting a steel structure. Think it was 6700lb at 120'.

Finally learned how to post pics.

Leaking final drive.

One of the final drives is leaking on my 8 ton kubota excavator. I have never had a final drive leak before. I was wondering how hard/big of a job it is to change the seal and what's all involved . I am hoping to fix it myself.

Thanks.

Leaking final drive.

fan belt for a Gehl 4640

besides dealer is there anywhere online that you can buy a v belt for a Gehl 4640 turbo engine I think the part # is 132989 from Gehl and it says size is 10mm x 1050mm.

fan belt for a Gehl 4640

Komatsu Hydraulic Fluid

Hi,

I have a 1994 Komatsu PC400-5 excavator in the western USA, rural area.

Trying to figure out what hydraulic fluid to use to top it off with. Recently had hydrualic fluid changed at dealer.

The manual says 10wt.
The dealer says 10wt, 10w-30 or 15-40 motor oil, not aw46
My service ticket under hydraulic fluid says "70 gal HO46" - but thats NOT 10wt motor oil... ?!!?
This doc seems to indicate it needs to be motor oil, AND HAVE DIESEL CD OR BETTER CERT, not aw46 (see esp page 10 ):...

Komatsu Hydraulic Fluid

Komatsu Hydraulic Fluid