Good Morning,
I've spent hours reading the forums here over the years and have found the information extremely valuable. I recently purchased a Lull 644 Highlander II and need to locate an operators manual. I have seen postings for the manual here, but no links for download. I'm honestly not sure what year the machine is, but I suspect it's early 90's. I haven't been able to locate the serial number either(the plaque seems to have been removed.) The machine needs tires and a hose or two, but it's only going to be used around the yard and to rebuild our house, not on a commercial job site. The main problem I have right now is the push pull cables for the gear select on the transmission and the tcase are missing. The forward and reverse cable is installed and working properly. I believe the machine has been used like this for years, but I am not sure which gears are selected on the trans currently. I have shifted the transmission manually, all positions appear to work but I'm not sure where 1st/low gear is. I'm hoping the operators manual will help further familiarize me with the machine. JLG's documentation doesn't go back far enough online. Thanks for the help.
Mike
Mpascino@gmail.com
I've spent hours reading the forums here over the years and have found the information extremely valuable. I recently purchased a Lull 644 Highlander II and need to locate an operators manual. I have seen postings for the manual here, but no links for download. I'm honestly not sure what year the machine is, but I suspect it's early 90's. I haven't been able to locate the serial number either(the plaque seems to have been removed.) The machine needs tires and a hose or two, but it's only going to be used around the yard and to rebuild our house, not on a commercial job site. The main problem I have right now is the push pull cables for the gear select on the transmission and the tcase are missing. The forward and reverse cable is installed and working properly. I believe the machine has been used like this for years, but I am not sure which gears are selected on the trans currently. I have shifted the transmission manually, all positions appear to work but I'm not sure where 1st/low gear is. I'm hoping the operators manual will help further familiarize me with the machine. JLG's documentation doesn't go back far enough online. Thanks for the help.
Mike
Mpascino@gmail.com
Operators manual for Lull 644 Highlander II needed
0 commentaires:
Enregistrer un commentaire