Today I put it to work and after about an hour of hard work, moving spoils in first gear and shuttling between forward and reverse a lot, it quit moving. The hydraulics are still strong but the forward/reverse quit working. The linkage looks good and the reverse alarm still beeps when in reverse but the machine doesn't move. After about 2 hours I started it, put it in 5th gear and then shuttled to forward and the machine worked. I then went back to work in first and after the first bite from the spoil pile it would not reverse. It will not go into forward or reverse again. I pulled the plug and checked the screen in the tranny and it is clean.
Any ideas?
Any ideas?
JD 710b trans/shuttle problem. What to check...
0 commentaires:
Enregistrer un commentaire