Hi everyone. I'm a brand new member and this is my first post. This is also my first piece of heavy equipment.
30 minutes after my new baby was delivered, it started stalling. The more I looked the machine over, the more I found wrong with it. Given the year, number of hours (3000) and the overall condition, I now know that I paid way to much for it.
All that being said, let me tell you about the problems that I cannot figure out on my own.
Its seems to run slightly better when cold. Sometimes, it makes no difference. The machine will just stall for no apparent reason. Every time it stalls it is very abrupt. Meaning, it's like the engine acts like it froze up. Most of the time, it will start back up as if nothing is wrong. Other times it will stall immediately. Where it gets a little weird, sometimes the ignition key get no response, no lights, no click, nothing. Wait five seconds, works fine. When there are no nights, I can still manually turn the lights on. Absolutely no error codes ever. List of things that will make the engine stall: Lowering the arms to fast and a hard hit at the bottom. If I drive about mid speed over a bump. Heavy load on bucket. Any type of jarring motion.
Things I have already tried. Tune up kit. All filters and oil, except case drains. (Not sure where they are) New fuel shut off solenoid. New fuel lines. Checked all fuses and relays. Battery connections. As much of the wiring that I can see. (Machine is very dirty and greasy)
Possibly unrelated issue. Sometimes, the tracks don't run real smooth and they seem to bind up. When this happens, the control arms are also hard to move.
I know this is a long post. I just wanted to give as much info as I could to help diagnose the problem.
Thanks in advance for any good advice. Love this site by the way. I've been reading everything I can find related to a t190.
30 minutes after my new baby was delivered, it started stalling. The more I looked the machine over, the more I found wrong with it. Given the year, number of hours (3000) and the overall condition, I now know that I paid way to much for it.
All that being said, let me tell you about the problems that I cannot figure out on my own.
Its seems to run slightly better when cold. Sometimes, it makes no difference. The machine will just stall for no apparent reason. Every time it stalls it is very abrupt. Meaning, it's like the engine acts like it froze up. Most of the time, it will start back up as if nothing is wrong. Other times it will stall immediately. Where it gets a little weird, sometimes the ignition key get no response, no lights, no click, nothing. Wait five seconds, works fine. When there are no nights, I can still manually turn the lights on. Absolutely no error codes ever. List of things that will make the engine stall: Lowering the arms to fast and a hard hit at the bottom. If I drive about mid speed over a bump. Heavy load on bucket. Any type of jarring motion.
Things I have already tried. Tune up kit. All filters and oil, except case drains. (Not sure where they are) New fuel shut off solenoid. New fuel lines. Checked all fuses and relays. Battery connections. As much of the wiring that I can see. (Machine is very dirty and greasy)
Possibly unrelated issue. Sometimes, the tracks don't run real smooth and they seem to bind up. When this happens, the control arms are also hard to move.
I know this is a long post. I just wanted to give as much info as I could to help diagnose the problem.
Thanks in advance for any good advice. Love this site by the way. I've been reading everything I can find related to a t190.
Proud new owner of a badly abused 2005 T190 Turbo
0 commentaires:
Enregistrer un commentaire