I've had a short with the lights for some time and with me on its shorted enough to melt the switch but not enough to blow the fuse. Here recently it wouldn't crank and when I finally pushed the shut off solenoid in and jumped off the starter solenoid it wouldn't move. I pulled all the relays and replaced one that appeared to have got hot, cleaned all the pins behind the relays and fuses and fuses on side of the dash. Now it will move and operate with some codes which are not related to cranking. When I turn key on the dash lights up but when I turn on over to start the dash goes out and nothing happens. I have been turning key on and pushing kill solenoid on and going to other side and jumping off starter selenoid. I'm lost and don't know where to look and test to resolve this starting issue. I would sure appreciate if someone could tell me what's going on. Thanks again.
2005 case 850k series 2 electrical starting problem
0 commentaires:
Enregistrer un commentaire