Hello!
I have a Bobcat S175. The codes it is showing are 04-21 05-21 09-21 and 11-06
11-06 is a seat bar short to ground
the others are fuel level hydraulic level and oil level all high
The seat bar light on the BICS flashes and when the key is powered on and it does a series of beeps, not like the two normal ones.
I have replaced the fuel solenoid, replaced the battery and the power cable to the 110amp fuse off the positive cable, also replaced that fuse. All fuses in the box between the legs are good and relays seem to be good had two new ones I swapped around with the same results.
When I jump the FUEL relay from top to bottom with a wire the solenoid will hold open but it will not hold open with the relay in while trying to starts, it opens for a split second on the first crank but that's it.
I cleaned the ground from the seat bar through the back of the cab
The Bobcat will run with the solenoid held open and it will drive with the traction lock override engaged, but the foot pedals will not operate.
Any help on trouble shooting this is greatly appreciated as I am stumped with it.
Thank you!
I have a Bobcat S175. The codes it is showing are 04-21 05-21 09-21 and 11-06
11-06 is a seat bar short to ground
the others are fuel level hydraulic level and oil level all high
The seat bar light on the BICS flashes and when the key is powered on and it does a series of beeps, not like the two normal ones.
I have replaced the fuel solenoid, replaced the battery and the power cable to the 110amp fuse off the positive cable, also replaced that fuse. All fuses in the box between the legs are good and relays seem to be good had two new ones I swapped around with the same results.
When I jump the FUEL relay from top to bottom with a wire the solenoid will hold open but it will not hold open with the relay in while trying to starts, it opens for a split second on the first crank but that's it.
I cleaned the ground from the seat bar through the back of the cab
The Bobcat will run with the solenoid held open and it will drive with the traction lock override engaged, but the foot pedals will not operate.
Any help on trouble shooting this is greatly appreciated as I am stumped with it.
Thank you!
Bobcat S175 Fuel Shutoff Solenoid Wont Stay Open??? Seat bar short to Ground?
0 commentaires:
Enregistrer un commentaire