Hi guys My 465 will not hold the curl or the lift, both drop slowly, my loader valve has the self leveling valve built in,
I had this problem before any work was done.
checked all 4 cylinder's
replaced hyd pump, wore out
changed hyd oil and filters, flushed system the best I could
pull the valve assembly replaced all the O rings, flushed completely.
several of my backing O rings were destroyed, so I figured this was my problem, not the case.
I think the problem is in one of the cartridges, but at 500 each I don't what to guess, but that's where I'm at now GUESSING!
I had this problem before any work was done.
checked all 4 cylinder's
replaced hyd pump, wore out
changed hyd oil and filters, flushed system the best I could
pull the valve assembly replaced all the O rings, flushed completely.
several of my backing O rings were destroyed, so I figured this was my problem, not the case.
I think the problem is in one of the cartridges, but at 500 each I don't what to guess, but that's where I'm at now GUESSING!
case 465 hyd problems
0 commentaires:
Enregistrer un commentaire