I have to admit I'm a little perplexed again, I did a little digging around the yard and dug up a stump yesterday. I noticed the the swing was loosing a lot of power, it couldn't even push loose dirt with the side of the bucket. Thought the oil might be getting hot but after it cooled it was still weak. It might have been that way all the time, not sure, first time digging. But it seems to me that it was stronger before.
The gauge on the test port from the pump shows 1,000 psi to the left and 1,400 to the right. Not sure what the set pressure is supposed to be because I don't see it here.http://ift.tt/1Oocw7g
I turned in the left (red circle) screw 1/4 turn and didn't notice any difference and the right (green circle) a full turn and still no difference. Apparently they don't do anything for setting the pressure. I think they let the boom drift after releasing the lever.
I don't see where the pressure adjustments are. Is there 1 or 2 and why 400 psi difference?
I fixed the leak today, fitting was loose.
As always, any help is appreciated.
The gauge on the test port from the pump shows 1,000 psi to the left and 1,400 to the right. Not sure what the set pressure is supposed to be because I don't see it here.http://ift.tt/1Oocw7g
I turned in the left (red circle) screw 1/4 turn and didn't notice any difference and the right (green circle) a full turn and still no difference. Apparently they don't do anything for setting the pressure. I think they let the boom drift after releasing the lever.
I don't see where the pressure adjustments are. Is there 1 or 2 and why 400 psi difference?
I fixed the leak today, fitting was loose.
As always, any help is appreciated.
Not swinging that good
0 commentaires:
Enregistrer un commentaire