While replacing a hose, I managed to crossthread and strip out the fitting from a valve box that supplies a swing cylinder. I'm having a difficult time finding a replacement. The fitting looks like this: 
It is 3/4" on both ends. The difficult part is that it is a restrictor. I'm eyeballing the hole to be about 1/8". I've found a part from Pressure Connection that matches the sizes, but the restrictors available are too small, and then there is the "blank" one. Is that what I'm needing? I'm guessing that I take it to a machine shop and have the orifice drilled to math the old one. Anyone know if the actual part is available off the shelf?
It is 3/4" on both ends. The difficult part is that it is a restrictor. I'm eyeballing the hole to be about 1/8". I've found a part from Pressure Connection that matches the sizes, but the restrictors available are too small, and then there is the "blank" one. Is that what I'm needing? I'm guessing that I take it to a machine shop and have the orifice drilled to math the old one. Anyone know if the actual part is available off the shelf?
Stripped fitting on Ford 4500 backhoe. Can't find replacement.
0 commentaires:
Enregistrer un commentaire