This may not be an issue but incase it may be in the future. My 416C back in the summer I found that when running it down the road in 4th gear. When moving at 20mph it starts climbing a hill and I have to gear down to 3rd and some time second depending on the incline. Figure this is normal but don't know for sure.
Yesterday it's 20 degrees and fire it up and plow the road in front of the house in 2nd gear, no issues noticed. This morning it's 10 degrees and try to pull it out after firing it up and it doesn't want to move. I shift to 1st gear and it comes out and I do some more plowing. Run the machine only about 15 minutes and shut it off. Decide about a half hour later to check the trans oil. Oil level is fine for start up, fire it up and in neutral oil level is high on the run side. Oil is clean and clear.
Do you think I have an issue coming or was it a case of cold weather and not running long enough
Yesterday it's 20 degrees and fire it up and plow the road in front of the house in 2nd gear, no issues noticed. This morning it's 10 degrees and try to pull it out after firing it up and it doesn't want to move. I shift to 1st gear and it comes out and I do some more plowing. Run the machine only about 15 minutes and shut it off. Decide about a half hour later to check the trans oil. Oil level is fine for start up, fire it up and in neutral oil level is high on the run side. Oil is clean and clear.
Do you think I have an issue coming or was it a case of cold weather and not running long enough
416C trans issue maybe
0 commentaires:
Enregistrer un commentaire