I've got two different actuators in my 863F the top one(tilt) is the newer style with the hex bolts and adapter.
The bottom(lift) actuator is the older style with the rubber boots and pin.
I'm guessing that removing the top one should be just a matter of removing the 3/16 hex bolts.
But I can't get to the bottom bolt without first removing the lift actuator since its bracket is completely blocking access.
So it seems that the lift actuator is going out first. However....
The pin holding the lift actuator to the spool spins freely, and even moves about a 1/16" in and out, but how do I remove it?
there does not seem to be any nut or cotter pin on the opposite side(the side I can't see). :idontgetit
The bottom(lift) actuator is the older style with the rubber boots and pin.
I'm guessing that removing the top one should be just a matter of removing the 3/16 hex bolts.
But I can't get to the bottom bolt without first removing the lift actuator since its bracket is completely blocking access.
So it seems that the lift actuator is going out first. However....
The pin holding the lift actuator to the spool spins freely, and even moves about a 1/16" in and out, but how do I remove it?
there does not seem to be any nut or cotter pin on the opposite side(the side I can't see). :idontgetit
removing actuators
0 commentaires:
Enregistrer un commentaire