Older bobcat 643 doesnt seem to drive at all on the left side in forward. In reverse it seems to pull a little. Turning is all but impossible in this thing. It's one of the setups where the pumps are inline with the motor. Kind of like the one willie59 showed in his thread on fixing the linkage. Accept this one the linkage is different and its on the side of the pumps not the top. I'll try and get a pic or two of it and put them up tonight.
Jacked it up off the wheels and both sides seem to do as they're told. I did stick a pressure guage on the case drain line for the L side and it was reading zero with the motor running and the wheels turning a little bit. Not sure if I totally trust that reading since the low battery light was lit on the gauge (digital model from parker)
Left side does need something done with the linkage as its center has a slight forward speed, but I cant find anyway to adjust it. Does anbody have a book for one of these machines or at least some tips. Picking up adapters so I can tee into the drive hoses tonight for pressure readings.
Jacked it up off the wheels and both sides seem to do as they're told. I did stick a pressure guage on the case drain line for the L side and it was reading zero with the motor running and the wheels turning a little bit. Not sure if I totally trust that reading since the low battery light was lit on the gauge (digital model from parker)
Left side does need something done with the linkage as its center has a slight forward speed, but I cant find anyway to adjust it. Does anbody have a book for one of these machines or at least some tips. Picking up adapters so I can tee into the drive hoses tonight for pressure readings.
Old(er) Bobcat 643 drive issues
0 commentaires:
Enregistrer un commentaire