Hi, new to this forum, just looking for some advice on a scissor lift i purchased recently.
All operations seem to work fine apart from the brakes. When traveling at full speed and the control is let go it takes a good .5 - .8m to stop, all other scissor lifts i have used always stop instantly.
There is one other problem which possibility is related. When traveling in the extended position fault code 59 id on the led readout and the red light on the controls turns on, but it still functions fine.
According to the manual Error code 59 relates to series/parallel coil fault and suggests the dip switch setting are incorrect, tried adjust the dip switch setting to no avail.
GS1932
SN: GS300467354
Any input would be greatly appreciated.
Regards Leroy
All operations seem to work fine apart from the brakes. When traveling at full speed and the control is let go it takes a good .5 - .8m to stop, all other scissor lifts i have used always stop instantly.
There is one other problem which possibility is related. When traveling in the extended position fault code 59 id on the led readout and the red light on the controls turns on, but it still functions fine.
According to the manual Error code 59 relates to series/parallel coil fault and suggests the dip switch setting are incorrect, tried adjust the dip switch setting to no avail.
GS1932
SN: GS300467354
Any input would be greatly appreciated.
Regards Leroy
Genie GS1932 brake problem?
0 commentaires:
Enregistrer un commentaire