Brandt just installed new tilt cylinder on loader, but did not fix the problem. when loaded and close to ground grapple creeps down. only creeps when there is a load on it and its close to the ground. when you try to tilt it back it moves slightly then drops and sounds like its going over relief, which it should be if the tilt cylinder was fully retracted with the bell crank hitting the loader frame. adjusted the relieve valves on the loader valve and it seemed to help. has anyone ran into faulty relief valves on these loaders or is it an internal leak through the spool valve?
JD 544k cylinder drift issue
0 commentaires:
Enregistrer un commentaire